[1]赵瑜,鲍福廷,胡志伟,等.AP/HTPB复合推进剂燃烧的详细化学动力学建模[J].固体火箭技术,2012,(03):311-318.[doi:10.7673/j.issn.1006-2793.2012.03.006]
点击复制

AP/HTPB复合推进剂燃烧的详细化学动力学建模

参考文献/References:

[1]Merrill W,Beckstead Karthik V,Puduppakkam,Vigor Yang T.Modeling and simulation of combustion of solid propellant ingredients using detailed chemical kinetics[C].40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,2004.
[2]Merrill W Beckstead, Derr R L,Price C F.A model of composite solid-propellant combustion based on multiple flames[J].AIAA Journal,1970,8(12): 2200-2207.
[3]Merrill W Beckstead.Combustion mechanisms of composite solid propellants[C].19th JANNAF Combustion Meeting,1982,2: 93-100.
[4]Scott A Felt.Two-dimensional modeling of AP composite propellant flame structure with detailed kinetics[D]. Department of Chemical Engineering,Brigham Young University,Provo,UT,2004.
[5]Matthew L Gross.Two-dimensional modeling of AP/HTPB utilizing a vorticity formulation and one-dimensional modeling of AP and AND[D]. Department of Chemical Engineering,Brigham Young University,Provo,UT,2007.
[6]Alexandre Ern.Vorticity-velocity modeling of chemically reacting flows[D].Yale University,USA,1994.
[7]Ermolin N E.Model for chemical reaction kinetics in perchloric acid-ammonia flames[J].Combustion,Explosion and Shock Waves,1995,31.
[8]Korobeinichev O P,Ermolin N E,Chernov A A,et al.Flame structure,kinetics mechanism of chemical reactions in flames of mixed composition based on ammonium perchlorate and polybutadiene rubber[J].Combustion,Explosion and Shock Waves,1992,28: 53-59.
[9]Balay S,Buschelman K, Eijkhout V,et al.PETSc users manual[M].Mathematics and Computer Science Division,Argonne National Laboratory,Revision 3.0.0.
[10]Ermolin N E,Korobeinichev O P, Tereshchenko A G,Fomin V M.Measurement of the concentration profiles of reacting components and temperature in an ammonium perchlorate flame[J].Combustion,Explosion and Shock Waves,1982,18.
[11]Jing Q,Beckstead M W,Jeppson M B.Influence of AP solidphase decomposition on temperature profile and sensitivity[R].AIAA,1997.
[12]eppson M B,Beckstead M W,Jing Q. A kinetic model for the premixed combustion of a fine AP/HTPB composite propellant[C].35th JANNAF Combustion Meeting,1998,639.
[13]Stephen B,Pope,Zhuyin Ren.Efficient implement of chemistry in computational combustion[J].Flow Turbulence Combust.,82:437-453.
[14] Foster R L,Condon J A,Miller R R.Low exponent technology[R].Report AFRPL-TR-81-95,Hercules Inc.prepared for Air Force Rocket Propulsion Laboratory,Edwards AFB,CA,1982.

相似文献/References:

[1]范美强,曾巨澜,邹勇进,等.铝水推进剂用铝基复合材料的制备及性能研究 [J].固体火箭技术,2007,(6):510.
[2]杨月诚,周志清,周伟,等.基于BDP多火焰模型的简化复合固体推进剂燃烧数值分析[J].固体火箭技术,2010,(02):185.
[3]万少文,何国强,刘佩进,等.RBCC混合燃烧模式下燃料喷注位置对燃烧性能影响研究[J].固体火箭技术,2010,(06):636.
[4]赵瑜,鲍福廷,胡声超.基于详细化学动力学的AP气相数值模拟[J].固体火箭技术,2011,(06):722.
[5]王英红,何长江,刘林林.固体推进剂燃烧气体摩尔数测试[J].固体火箭技术,2012,(02):276.
[6]敖文,杨卫娟,韩志江,等.硼颗粒点火燃烧模型研究进展[J].固体火箭技术,2012,(03):361.[doi:10.7673/j.issn.1006-2793.2012.03.016]
[7]蔚红建,付小龙,李吉祯,等.三基色测量法在S-GAP推进剂火焰温度分布中的应用[J].固体火箭技术,2013,(01):133.
[8]周兴明,胡晓,毛胜华,等.降低固体化学氧气发生器温度敏感性研究[J].固体火箭技术,2013,(04):534.
[9]孙迪,刘佩进,刘林林,等.基于BDP模型的AP/HTPB推进剂燃速参数敏感性分析[J].固体火箭技术,2015,(02):245.
[10]贺征,刘丛林,李卓,等.金属颗粒燃烧过程表面曳力变化的数值研究[J].固体火箭技术,2018,41(04):492.

更新日期/Last Update: 2012-08-01
分享