[1]方国东,韩杰才,梁军,等.轴编C/C复合材料组分材料有效性能[J].固体火箭技术,2012,(05):644-649.
点击复制

轴编C/C复合材料组分材料有效性能

参考文献/References:

[1]John D B,Dan D E.Carbon-arbon materials and composites[M].Noyes publications,Park Ridge,New Jersey,USA,1993.
[2]Li D S,Lu Z X,Chen L,et al.Microstructure and mechanical properties of three-imensional five-irectional braided composites[J].Inte.J.Solids Stru.,2009,46:3422-432.
[3]Steen M,Valles J L.Determination of in-itu fibre,matrix and interface properties in a composite using tensile tests and an extended shear-ag model[J].Mater.Sci.Engrg.,1998,A250:217-21.
[4]程添乐,夏源明.一种测定单向纤维增强陶瓷基复合材料组分“原位”弹性模量的方法[J].复合材料学报,2007,24(1):75-0.
[5]Gowayed Y,Ojard G,Miller R,et al.Correlation of elastic properties of melt infiltrated SiC/SiC composites to in situ properties of constituent phases[J].Compos.Sci.Technol.,2010,70:435-41.
[6]Ojard G,Rugg K,Riester L,et al.Constituent properties determination and model verification for a ceramic matrix composite systems[J].Ceram.Eng.Sci.Proc.,2005,26(2):343-5.
[7]Song S,Waas A M,Shahwan K W,et al.Braided textile composites under compressive loads:modeling the response,strength and degradation[J].Compos.Sci.Technol.,2007,67(1516):3059-070.
[8]Song S J,Waas A M,Shahwan K W,et al.Compression response of 2D braided composites:single cell and multiple cell micromechanics based strength preditions[J].J.Compos.Mater.,2008,42(23):2461-482.
[9]Anjum M F,Imran T,Khaled A S.Response surface methodology:a neural network approach[J].European J.Operational Res.,1997,101:65-3.
[10]高波,唐敏,杨月城,等.4D 轴编C/C 复合材料力学性能实验研究[J].复合材料学报.2011,28(6):245-50.
[11]Xia Z,Zhou C,Yong Q,et al.On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-echanical analysis of composites[J].Inte.J.Solids Stru.,2006,43:266-78.
[12]Gommers B,Verpoest I,Van Houtte P.Modeling the elastic properties of knitted-abric-einforced composites[J].Compos.Sci.Technol.,1996,56:685-94.
[13]傅荟璇,赵红,等.Matlab神经网络应用设计[M].北京:机械工业出版社,2010.



相似文献/References:

[1]汪海滨,李鑫.轴编C/C复合材料喉衬的多尺度烧蚀分析方法[J].固体火箭技术,2017,40(03):295.[doi:10.7673/j.issn.1006-2793.2017.03.005]
 [J].Journal of Solid Rocket Technology,2017,40(05):295.[doi:10.7673/j.issn.1006-2793.2017.03.005]

更新日期/Last Update: 2012-12-14
分享