[1]孙国栋,李贺军,付前刚,等.异形构件化学气相沉积SiC涂层的数值模拟[J].固体火箭技术,2017,40(02):232-238.[doi:10.7673/j.issn.1006-2793.2017.02.018]
点击复制

异形构件化学气相沉积SiC涂层的数值模拟

参考文献/References:

[1]Savage G.Carbon-carbon composites[M].London:Chapman & Hall,1993:198-209.[2]李贺军.炭/炭复合材料[J].新型炭材料,2001,16(2):79-80.[3]罗瑞盈,杨峥.炭/炭复合材料研究新进展[J].炭素技术,1997(3):36-40.[4]付前刚,李贺军,史小红,等.沉积位置对化学气相沉积SiC涂层微观组织的影响[J].西安交通大学学报,2005,39(1):49-52.[5]曾志安,崔红,李瑞珍.C/C复合材料高温抗氧化研究进展[J].炭素,2006(1):12-16.[6]李贺军,曾燮榕,李克智.炭/炭复合材料研究应用现状及思考[J].炭素技术,2001(5):24-27.[7]张武装,熊翔,曾毅.包埋法制备SiC涂层C/C复合材料及真空热处理对涂层的影响[J].粉末冶金材料科学与工程,2011,16(2):231-236.[8]Zhang Y L,Hu Z X,Ren J C,et al.Influence of preparation temperature on the oxidation resistance and mechanical properties of C/SiC coated C/C composites[J].Corrosion Science,2014,86(9):337-342.[9]黄敏,李克智,李贺军,等.包埋工艺参数对碳/碳复合材料表面SiC涂层致密性的影响[J].机械工程材料,2009,33(3):337-342.[10]Huang J F,Zeng X R,Li H J,et al.Influence of the preparation temperature on the phase,microstructure and anti-oxidation property of a SiC coating for C/C composites[J].Carbon,2004,42(8-9):1517-1521.[11]Wang B,Li K Z,Li H J,et al.SiC coating prepared by a two-step technique of pack cementation and CVD on carbon/carbon composites[J].Journal of Inorganic Materials,2007,22(4):737-741.[12]刘荣军,周新贵,张长瑞,等.化学气相沉积工艺制备SiC涂层[J].宇航材料工艺,2002,32(5):42-44.[13]Zhang C R,Liu R J,Cao Y R.Effects of deposition temperature on the microstructures of SiC coatings by CVD[J].Journal of Inorganic Materials,2007,22(1):153-158.[14]Liu R J,Zhang C R,Zhou X G,et al.Growth characteristics of chemical vapor deposited SiC coatings [J].Journal of Inorganic Materials,2005,20(2):425-429.[15]周乐平,张明瑜,黄启忠.沉积条件对CVD法SiC涂层形貌和组成成分的影响[J].炭素技术,2010,29(5):1-4. [16]Hu C,Niu Y R,Li H,et al.SiC Coatings for carbon/carbon composites fabricated by vacuum plasma spraying technology[J].Journal of the Thermal Spray Technology,2012,21(1):16-22.[17]刘兴昉,黄启忠,苏哲安,等.化学气相反应法制备SiC涂层[J].硅酸盐学报,2004,32(7):906-910.[18]Fu Q G,Xue H,Wu H,et al.A hot-pressing reaction technique for SiC coating of carbon/carbon composites[J].Ceramics International,2010,36(4):1463-1466.[19]Choy K L.Chemical vapour deposition of coatings[J].Progress in Materials Science,2003,48(2):57-170.[20]Bird R B,Stewart W E,Lightfoot E N.Transport phenomena[M].New York:John Wiley & Sons,1960. [21]Incropera F P,Dewitt D P,Bergman T L,et al.Fundamentals of heat and mass transfer[M].New York:John Wiley & Sons,2007.[22]Welty J R,Wicks C E,Wilson R E,et al.Fundamentals of momentum,heat,and mass transfer[M].New York:John Wiley & Sons,2001.[23]孙文策.工程流体力学[M].大连:大连理工出版社,1995. [24]朱一锟.流体力学基础[M].北京:北京航空航天大学出版社,1990.[25]莫乃榕.工程流体力学[M].武汉:华中理工大学出版社,2000. [26]李万平.计算流体力学[M].武汉:华中科技大学出版社,2004[27]李汝辉.传质学基础[M].北京:北航院出版社,1987. [28]王绍亭,陈涛.动量、热量与质量传递[M].天津:天津科学技术出版社,1986.[29]Deepak,Evens J W.Mathematical model for chemical vapor infiltration in a microwaveheated perform[J].J.Am.Ceram.Soc.,1993,76(8):1924-1929.[30]孙国栋.CVD SiC涂层工艺过程计算机模拟与优化设计 [D].西安:西北工业大学,2010.

相似文献/References:

[1]孙国栋,李贺军,付前刚,等.带有SiC涂层的C/C复合材料的氧化行为[J].固体火箭技术,2010,(01):91.
[2]王永杰,李贺军,付前刚,等.沉积位置对HfC涂层微观结构的影响[J].固体火箭技术,2013,(03):394.
[3]金保宏1,2,高 禹1,等.游离碳对SiC 薄膜微观结构的影响[J].固体火箭技术,2014,(02):258.[doi:10.7673/ j.issn.1006⁃2793.2014.02.022]
 ,,et al.Effects of free carbon on microstructure of SiC film[J].Journal of Solid Rocket Technology,2014,(02):258.[doi:10.7673/ j.issn.1006⁃2793.2014.02.022]
[4]张渭阳,郭领军,王少龙,等.沉积位置对LPCVD SiC涂层微观结构的影响[J].固体火箭技术,2014,(05):724.
[5]孙国栋,李辉,邓娟利.SiC涂层制备工艺对C/C复合材料微观结构及性能的影响[J].固体火箭技术,2016,(01):100.
[6]解静,孙国栋,李辉.CVD-SiC涂层封孔处理后C/C-ZrC-SiC复合材料的烧蚀行为[J].固体火箭技术,2018,41(06):772.
 XIE Jing,SUN Guodong,LI Hui.Ablation behavior of C/C-ZrC-SiC composites after surface sealing by CVD-SiC coating[J].Journal of Solid Rocket Technology,2018,41(02):772.
[7]成功,熊玉卿,周晖,等.高温抗氧化铱涂层复合制备技术展望[J].固体火箭技术,2019,42(04):499.
 CHENG Gong,XIONG Yuqing,ZHOU Hui,et al.Prospect of hybrid manufacturing technology on high-temperature anti-oxidation iridium coatings[J].Journal of Solid Rocket Technology,2019,42(02):499.

更新日期/Last Update: 2017-06-01
PDF下载 分享