[1]秦少东,田维平,王健儒,等.分段式固体发动机颗粒沉积规律研究[J].固体火箭技术,2018,41(06):671-676.
 QIN Shaodong,TIAN Weiping,WANG Jianru,et al.Research on particle deposition of segmented solid rocket motor[J].Journal of Solid Rocket Technology,2018,41(06):671-676.
点击复制

分段式固体发动机颗粒沉积规律研究

参考文献/References:

[1]王健儒,张光喜.分段式固体发动机技术发展与应用进展[J].固体火箭技术,2016,39(4): 451-455.WANG Jianru,ZHANG Guangxi.Research on application and development of segmented SRM[J].Journal of Solid Rocket Technology,2016,39(4): 451-455.

[2]Jasper C Lal.Investigation of slag accumulation in solid rocket motors[C]//49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference.July 14-17,2013
[3]苗志文.分段式固体火箭发动机粒子沉积及扩张段粒子冲刷研究[D].西安:航天动力技术研究院,2017.MIAO Zhiwen.Study on particle deposition and particle scouring in divergent section of segmented solid rocket motor[D].Xi’an: Academy of Aerospace Solid Propulsion Technology,2017.[4]敖文,刘佩进.固体推进剂铝团聚模型[J].航空动力学报,2017,32(5): 1224-1233.AO Wen,LIU Peijin.Models of aliuminum agglomeration in solid propellents[J].Journal of Aerospace Power,2017,32(5): 1224-1233.
[5]刘佩进,白俊华,杨向明,等.固体火箭发动机燃烧室凝相粒子的收集与分析[J].固体火箭技术,2008,31(5): 461-479.LIU Peijin,BAI Junhua,YANG Xiangming,et al.Collection and analysis on the condensed-phase particles in the chamber of SRM[J].Journal of Solid Rocket Technology,2008,31(5): 461-479.
[6]李强,甘晓松,刘佩进,等.大型固体发动机潜入式喷管背壁区域熔渣沉积数值模拟[J].固体火箭技术,2010,33(2): 148-151.LI Qiang,GAN Xiaosong,LIU Peijin,et al.Numerical simulation of slag accumulation for submerged nozzle of large scale SRM[J].Journal of Solid Rocket Technology,2010,33(2): 148-151.
[7]Salita M.Deficiencies and requirement in modeling of slag generation in solid rocket motor[J].Journal of Propulsion and Power,1995,11(1): 10-23.
[8]Salita M.Predicted slag deposition histories in eight solid rocket motors using the CFD"EVT"[R].AIAA 95-2728.
[9]Salita M.Two-phase flows in rocket motors[R].RTO-AVT-VKI Special Course,Internal Aerodynamics in Solid Rocket.Propulsion,May 2002.
[10]张胜敏,胡春波,徐义华,等.固体火箭发动机燃烧室凝相颗粒燃烧特性分析[J].固体火箭技术,2010,33(3): 256-259.ZHANG Shengmin,HU Chunbo,XU Yihua,et al.Combustion characteristic analysis on condensedphase particle in SRM chamber[J].Journal of Solid Rocket Technology,2010,33(3): 256-259.

相似文献/References:

[1]王建儒,何国强,许团委,等.燃烧室对接狭缝设计参数对压强振荡的影响研究[J].固体火箭技术,2012,(04):474.
[2]王建儒,何国强,许团委,等.分段式固体发动机绝热环对后封头绝热层烧蚀影响分析[J].固体火箭技术,2013,(03):318.
[3]杨昀,何国强,李江,等.分段装药固体火箭发动机限燃层烧蚀实验方法[J].固体火箭技术,2013,(03):334.
[4]王健儒,张光喜.分段式固体发动机技术发展与应用进展[J].固体火箭技术,2016,(04):451.

更新日期/Last Update: 2019-01-02
PDF下载 分享