[1]王革,张莹,李冬冬,等.大长径比固体火箭发动机工作过程中压力响应的数值研究[J].固体火箭技术,2018,41(06):702-709.
 WANG Ge,ZHANG Ying,LI Dongdong,et al.Numerical analysis on pressure response of SRM with large aspect ratio[J].Journal of Solid Rocket Technology,2018,41(06):702-709.
点击复制

大长径比固体火箭发动机工作过程中压力响应的数值研究

参考文献/References:

[1]Flandro G A,Jacobs H R.Vortex generated sound in cavities aeroacoustics[C]//Aeroacoustics Conference,New York,1973:521-533.

[2]Blomshield F S.Lessons learned in solid rocket combustion instability[C]//43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,Cincinnati,2007:8-11.
[3]Anthoine J,Buchlin J M,Gu J F,et al.Effect of nozzle cavity on resonance in large SRM:Numerical simulations[J].Journal of Propulsion & Power,2003,19(3):374-384.
[4]Anthoine J,Hirschberg A,Buchlin J M.Effect of nozzle cavity on resonance in large SRM:Theoretical modeling[J].Journal of Propulsion & Power,2002,18(2):304-311.
[5]Stella F,Paglia F.Pressure oscillation in solid rocket motors:numerical study[J].Aerospace Science & Technology,2011,15(1):53-9.
[6]Jiang X.Direct computation and aeroacoustic modelling of a subsonic axisymmetric jet[J].Journal of Sound and ation,2004(270):525-538.[7]刘佩进,杨尚荣.分段固体火箭发动机中声涡耦合现象的实验研究现状[J].固体火箭技术,2012,35(6):726-731.LIU Peijin,YANG Shangrong.An overview on experimental study of vortex-acoustic coupling in segmented solid rocket motors[J].Journal of Solid Rocket Technology,2012,35(6):726-731.
[8]王健儒,何国强,李强,等.分段式固体火箭发动机内部流动不稳定性数值分析[J].推进技术,2013,34(1):95-100.WANG Jianru,HE Guoqiang,LI Qiang,et al.Numerical analysis of flow instability in segmented SRM[J].Journal of Propulsion Technology,2013,34(1):95-100.
[9]杨尚荣,刘佩进,魏祥庚,等.固体火箭发动机径向加质流局部稳定性分析方法研究[J].推进技术,2013,34(7):925-931.YANG Shangrong,LIU Peijin,WEI Xianggeng,et al.A Study of analysis method for hydrodynamic stabilities of solid rocket motors with side-induced flow[J].Journal of Propulsion Technology,2013,34(7):925-931.
[10]Varapaev V N,Yagodkin V I.Flow stability in a channel with porous walls[J].Fluid Dynamics,1969,4(5):60-62.
[11]Casalis G,Avalon G,Pineau J P.Spatial instability of planar channel flow with fluid injection through porous walls [J].Physics of Fluids,1998,10(10):2558-2568.
[12]Lee Y,Beddini R A.Acoustically-induced turbulent transition in solid propellant rocket[C]//35th Joint Propulsion Conference and Exhibit,2000:99-2508.?
[13]苏万兴.大长径比固体火箭发动机不稳定燃烧预示及抑制方法研究[D].北京:北京理工大学,2015.SU Wanxing.Prediction and suppression methods of combustion instability in large aspect ratio solid rocket motors[D].Beijing:Beijing Institute of Technology,2015.
[14]张峤,李军伟,王伟臣,等.固体火箭发动机涡声耦合特性数值研究[J].推进技术,2011,32(3):348-354.ZHANG Qiao,LI Junwei,WANG Weicheng,et al.Numerical analysis on vortex acoustic coupling characteristics in solid rocket motors[J].Journal of Propulsion Technology,2011,32(3):348-354.[15]李鹏飞.固体火箭发动机内涡脱落现象的大涡模拟[D].哈尔滨:哈尔滨工程大学,2013.LI Pengfei.Large eddy simulation of vortex shedding for solid rocket motor[D].Harbin:Harbin Engineering University,2013.
[16]Raheem S A,Babu V.Numerical Simulations of unsteady flows in solid rocket motors[C]//10th AIAA/CEAS Aeroacoustics Conference.2004:1-15.
[17]Shanbhogue S J,Sjith R I.Aeroacoustics of rocket motors with finocyl grain[R].AIAA,2003:1-6.
[18]李强,何国强,刘佩进,等.模型固体火箭发动机内涡脱落过程的大涡模拟[J].推进技术,2005,26(6):481-484.LI Qiang,HE Guoqiang,LIU Peijin,et al.Large eddy simulation of vortex shedding for model SRM[J].Journal of Propulsion Technology,2005,26(6):481-484.
[19]张翔宇,何国强,刘佩进.固体火箭发动机转角涡脱落分类[J].航空动力学报,2014,29(8):2003-2011.ZHANG Xiangyu,HE Guoqiang,LIU Peijin.Classification of corner vortex shedding in solid rocket motor[J].Journal of Aerospace Power,2014,29(8):2003-2011.
[20]杨羽卓.涡脱落引起的发动机压力振荡研究[D].哈尔滨:哈尔滨工程大学,2016.YANG Yuzhuo.Research of vortex-driven pressure oscillation in solid rocket motors[D].Harbin:Harbin Engineering University,2016.
[21]杨羽卓,郜冶.涡脱落撞击潜入式喷管引起低频压力振荡研究[J].固体火箭技术,2016,39(4):456-462.YANG Yuzhuo,GAO Ye.Study on low frequency pressure oscillations induced by vortex impacting on submerged nozzle[J].Journal of Solid Rocket Technology,2016,39(4):456-462.
[22]韩万之.基于level-set方法模拟复杂装药燃面退移瞬态内流场[D].哈尔滨:哈尔滨工程大学,2016.HAN Wanzhi.Simulation of the transient internal flow of SRM with the grain surface regression based on level-set method[D].Harbin:Harbin Engineering University,2016.

相似文献/References:

[1]李娟,李江,王毅林,等.喉栓式变推力发动机性能研究 [J].固体火箭技术,2007,(6):505.
[2]尤军峰,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,(2):173.
[3]陈林泉,毛根旺,张胜勇.高能固体火箭发动机爆炸冲击波毁伤效应研究[J].固体火箭技术,2008,(6):588.
[4]白宏伟,尤军峰,张铎,等.级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析[J].固体火箭技术,2008,(6):595.
[5]陈林泉,毛根旺,陈军涛.采用高低燃温组合装药降低喷管内表面温度和烧蚀研究[J].固体火箭技术,2008,(6):599.
[6]苑博,刘勇琼,尤军峰,等.轴压载荷作用下全复合材料裙与壳体搭接区的结构分析[J].固体火箭技术,2008,(6):629.
[7]樊建龙,唐金兰,李进贤,等.固体火箭发动机点火瞬间火焰传播模型比较研究[J].固体火箭技术,2008,(6):575.
[8]窦毅芳,刘飞,张为华.基于张量积函数的固体火箭发动机性能散布分析[J].固体火箭技术,2008,(6):579.
[9]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[10]邹汝平,李晓斌,张为华.固体发动机内弹道计算不确定性研究[J].固体火箭技术,2009,(01):33.

更新日期/Last Update: 2019-01-02
PDF下载 分享