[1]张镇国,沙宝林,王才,等.基于Abaqus的往复运动中双道O型圈密封性能分析[J].固体火箭技术,2019,42(01):85-91.
 ZHANG Zhenguo,SHA Baolin,WANG Cai,et al.Analysis of the double-sealing performance of O-ring in reciprocating movement based on Abaqus[J].Journal of Solid Rocket Technology,2019,42(01):85-91.
点击复制

基于Abaqus的往复运动中双道O型圈密封性能分析

参考文献/References:

[1]任全彬,何景轩,刘伟凯,等.固体火箭发动机设计技术基础[M].西安:西北工业大学出版社,2016.REN Q B,HE J X,LIU W K,et al.Design technical basis of solid rocket motor[M].Xi’an:Noethwestern Polytech-nical University Press,2016.

[2]Thomas David Juska.The mechanical behavior and defor-mation morphology of rubber modified polypropylene[D].PhD thesis,University of Massachusetts-Amherst,1982.
[3]莫丽,王军.O形圈动密封特性的有限元分析[J].机械科学与技术,2015,34(3):386-392.MO L,WANG J.Finite element analysis of the dynamic sealing characteristics for O-ring[J].Mechanical Science and Technology for Aerospace Engineering,2015,34(3):386-392.
[4]韩传军,张杰,黄岗,等.往复密封中星型密封圈的密封性能分析[J].润滑与密封,2012,37(9):28-36.HAN C J,ZHANG J,HUANG G,et al.Seal performance analysis of a star sealing ring in reciprocating seal[J].Lubrication Engineering,2012,37(9):28-36.
[5]王国荣,胡刚,何霞,等.往复密封轴用Y形密封圈密封性能分析[J].机械设计与研究,2014,30(12):37-46.WANG G R,HU G,HE X,et al.Sealing performance analysis of Y-ring used on reciprocating seal shaft[J].Machine Design and Research,2014,30(12):37-46.
[6]钟亮,赵俊利.往复密封中O形密封圈组合的有限元分析[J].橡胶工业,2014,61(4):231-235.ZHONG L,ZHAO J L.Finite element analysis for O-ring combination in reciprocating seal[J].China Rubber Indu-stry,2014,61(4):231-235.
[7]陈家照,黄闽翔,王学仁.固体火箭发动机长期贮存下橡胶O形圈泄露分析[J].润滑与密封,2016,41(2):76-80.CHEN J Z,HUANG M X,WANG X R.Leakage analysis on rubber Oring of solid rocket motor under long-term storage[J].Lubrication Engineering,2016,41(2):76-80.
[8]吴琼,索双富,刘向锋,等.丁腈橡胶O形圈的静密封及微动密封特性[J].润滑与密封,2012,37(11):5-11.WU X,SUO S F,LIU X F,et al.Static sealing and pseudo-o-sealing characteristics of nitrile rubber O-ring[J].Lubrication Engineering,2012,37(11):5-11.
[9]吴长贵,索双富,李雪梨.基于ABAQUS的往复密封仿真分析[C]//第十一届中国CAE工程分析技术年会论文集,2015.WU C G,SUO S F,LI X L.Simulation analysis of recipro-cating seals based on ABAQUS[C]//The 11th China CAE Annual Conference,2015.
[10]蒋小敏,甘志银.真空密封中O形圈和燕尾槽的使用研究[J].装备制造技术,2014,45(3):45-47,55.JIANG X M,GAN Z Y.Research of O-ring and dovetail groove in the seal of vacuum cavum[J].Equipment Man-ufacturing Technology,2014,45(3):45-47,55.
[11]陈国定,Haiser H,Hass W,等.O形密封圈的有限元力学分析[J].机械科学与技术,2000,19(5):740-743.CHEN G D,Haiser H,Hass W,et al.Analysis of elastomeric O-ring seals using the finite element method[J].Mechanical Science and Technology,2000,19(5):740-743.
[12]海因茨K米勒,伯纳德 S.流体密封技术原理与应用[M].程传庆,译.北京:机械工业出版社,2002.Heinz K Miller,Bernard S.Fluid sealing technology-prin-ciples and applications[M].CHENG C Q,translated.Beijing:China Machine Press,2002.

更新日期/Last Update: 2019-03-21
PDF下载 分享