[1]刘辉,曾金芳,余惠琴,等.不同橡胶基绝热材料性能对比分析[J].固体火箭技术,2019,42(01):105-111.
 LIU Hui,ZENG Jinfang,YU Huiqin,et al.Comparative performance analyses for different rubber-based insulation materials[J].Journal of Solid Rocket Technology,2019,42(01):105-111.
点击复制

不同橡胶基绝热材料性能对比分析

参考文献/References:

[1]Ashraf Fathy Ahmed,Suong V Hoa.Thermal insulation by heat resistant polymers for solid rocket motor insulation[J].Journal of Composite Materials,2012,46(13):1549-1559.

[2]Boury D,Rey J,Cronier A,et al.Rubber materials and solid propulsion general overview & technical challenges[C]//41st AIAA/ASME/SAE/ ASEE Joint Propulsion Conference & Exhibit 10-13 July 2005,Tucson,Arizona.
[3]Oyumi,Yoshio.Ablation characteristics of silicone insulation[J].Journal of Polymer Science Part A:Polymer Chemistry,1998,36(2):233-239.[4]杨磊.热硫化硅橡胶基耐烧蚀复合材料的制备与性能研究[D].沈阳:沈阳理工大学,2015.YANG Lei.Preparation and properties of HTV ablative composites[D].Shenyang: Shenyang Ligong University,2015.
[5]陈永军,邹华,伍社毛,等.丁腈橡胶复合材料的制备与性能[J].机械工程材料,2017,41(9):61-67.CHEN Yongjun,ZOU Hua,WU Shemao,et al.Preparation and properties of nitrile rubber composite[J].Materials for Mechanical Engineering,2017,41(9):61-67.?
[6]Maurizio Natali,Marco Rallini,Debora Puglia,et al.EPDM based heat shielding materials for Solid Rocket Motors:A comparative study of different fibrous reinforcements[J].Polymer Degradation and Stability,2013,98(11):2131-2139.
[7]李艳芹,张华强,董静,等.丁二烯异戊二烯橡胶研究进展[J].当代化工,2011,40(2):186-189.LI Yanqin,ZHANG Huaqiang,DONG Jing,et al.Research progress in butadieneisoprene rubber[J].Contemporary Chemical Industry,2011,40(2):186-189.

相似文献/References:

[1]张杰,孙冰.基于热解动力学的绝热材料烧蚀研究[J].固体火箭技术,2010,(04):454.
[2]陈剑,李江,李强,等.EPDM绝热材料炭化层结构特征及其对烧蚀的影响[J].固体火箭技术,2011,(01):122.
[3]尹健,张红波,左劲旅.预制体中添加碳化钨的C/C复合材料结构与烧蚀性能[J].固体火箭技术,2011,(03):360.
[4]严聪,刘洋,孙得川,等.模拟固冲条件下绝热材料烧蚀实验及影响规律研究[J].固体火箭技术,2011,(04):506.
[5]许承海,孟松鹤,白光辉,等.多向编织炭/炭复合材料烧蚀/侵蚀特性研究[J].固体火箭技术,2011,(06):772.
[6]李强,杨飒,李江,等.EPDM绝热材料耦合烧蚀模型[J].固体火箭技术,2012,(01):114.
[7]段红英,迟伟东,刘云芳,等.炭纤维的表面处理及其增强室温硫化硅橡胶烧蚀材料[J].固体火箭技术,2014,(01):122.[doi:10.7673/j.issn.1006-2793.2014.01.024]
[8]王周成,张飞,陈慧,等.轴棒法编织C/C喉衬烧蚀性能缩比试验评价方法[J].固体火箭技术,2014,(04):583.
[9]徐义华,张燕海,杨玉新,等.粒子侵蚀模型及粒子侵蚀下绝热材料烧蚀数值计算[J].固体火箭技术,2015,(01):37.
[10]葛徐涛,张双琨,苗振威,等.氟代烷氧基聚磷腈弹性体的合成及性能研究[J].固体火箭技术,2017,40(01):95.[doi:10.7673/j.issn.1006-2793.2017.01.017]

更新日期/Last Update: 2019-03-21
PDF下载 分享