[1]任晓双,王冬,陈平.固体火箭发动机射线检测仿真系统[J].固体火箭技术,2019,42(01):112-118.
 REN Xiaoshuang,WANG Dong,CHEN Ping.Ray detection simulation system for solid rocket motor[J].Journal of Solid Rocket Technology,2019,42(01):112-118.
点击复制

固体火箭发动机射线检测仿真系统

参考文献/References:

[1]孙朝明,王增勇.射线检测中的仿真技术发展[J].无损检测,2006,28(9):475-478.SUN Chaoming,WANG Zengyong.Overview of computer simulation of radiographic testing[J].Nondestructive Testing,2006,28(9):475-478.

[2]王倩妮,马海全,苏宇航.射线检测计算机仿真技术及其应用[J].无损检测,2015,37(11):13-17.WANG Qianni,MA Haiquan,SU Yuhang.Applications of computer simulation of radiographic testing in aeronautical parts inspection[J].Nondestructive Testing,2015,37(11):13-17.
[3]Hugonnard P, Gliere A.X-Ray- simulation and applicati-ons[J].Computerized Tomography for Industrial Applications and Image Processing in Radiology,1999:220-227.?
[4]Colijn A P,Zbijewski W,Sasov A,et al.Experimental val-idation of a rapid monte carlo based micro-CT simulator[J].Phys.Med.Biol.,2004,49(18):4321-4333.
[5]Calmon P,Mahaut S,Chatillon S,et al.CIVA:an expertise platform for simulation and processing NDT data[J].Ultr-asonics,2006,44(8):e975-e979.
[6]Bakhoda A,Yuan G L,Fung W W L,et al.Analyzing CUDA workloads using a detailed GPU simulator[C]// IEEE International Symposium on Performance Analysis of Systems and Software.IEEE Xplore,2017:163-174.
[7]Yuan Y,Quan J,Wu C,et al.Ray tracing acceleration structure based on Octree adaptive volume merging[J].Acta Optica Sinica,2017,37(1):0120001.
[8]陈平.虚拟CT系统成像过程仿真技术研究[D].太原:中北大学,2009.CHEN Ping.Research on simulation of imaging process based on virtual CT system[D].Taiyuan:North University of China,2009.
[9]Zhang C,Jiang Z,Lu D,et al.3D MEMS design method via solidworks[C]// IEEE International Conference on Nano/micro Engineered and Molecular Systems.IEEE,2007:747-751.?
[10]朱凯,王倩妮,郭广平,等.X射线检测仿真软件成像的黑度修正[J].无损检测,2013,35(6):53-56.ZHU Kai,WANG Qianni,GUO Guangping,et al.Method of film density correction in computer simulated X-ray radiograph[J].Nondestructive Testing,2013,35(6):53-56.
[11]张建合,陈存柱.工业X射线胶片特性曲线的比较测定法及应用[J].无损检测,2002,24(9):404-406.ZHANG Jianhe,CHEN Cunzhu.A comparative method for the characteristic curves of industrial X-ray films and its application[J].Nondestructive Testing,2002,24(9):404-406.?
[12]美国无损检测学会编.美国无损检测手册[M].射线卷.上海:世界图书出版公司,1992.American Institute of Nondestructive Testing.American Nondestructive Testing Handbook[M].Radiation Testing.Shanghai:World Book Publishing Company,1992.
[13]黄魁东,张定华,刘晶,等.一种基于STL样本的锥束CT快速仿真方法[J].系统仿真学报,2007,19(11):2578-2582.HUANG Kuidong,ZHANG Dinghua,LIU Jing,et al.Rapid simulation method of cone-beam computed tomography based on STL phantom[J].Journal of System Simulation,2007,19(11):2578-2582.?
[14]Sanders J,Kandrot E.CUDA by Example:An introduction-n to general-purpose GPU programming[M].Addison-W esley Professional,2010.[15]Woo M.OpenGL programming guide[J].Official Guide to Learning Opengl,1999,48(427):1007-1007.

相似文献/References:

[1]李娟,李江,王毅林,等.喉栓式变推力发动机性能研究 [J].固体火箭技术,2007,(6):505.
[2]尤军峰,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,(2):173.
[3]陈林泉,毛根旺,张胜勇.高能固体火箭发动机爆炸冲击波毁伤效应研究[J].固体火箭技术,2008,(6):588.
[4]白宏伟,尤军峰,张铎,等.级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析[J].固体火箭技术,2008,(6):595.
[5]陈林泉,毛根旺,陈军涛.采用高低燃温组合装药降低喷管内表面温度和烧蚀研究[J].固体火箭技术,2008,(6):599.
[6]苑博,刘勇琼,尤军峰,等.轴压载荷作用下全复合材料裙与壳体搭接区的结构分析[J].固体火箭技术,2008,(6):629.
[7]樊建龙,唐金兰,李进贤,等.固体火箭发动机点火瞬间火焰传播模型比较研究[J].固体火箭技术,2008,(6):575.
[8]窦毅芳,刘飞,张为华.基于张量积函数的固体火箭发动机性能散布分析[J].固体火箭技术,2008,(6):579.
[9]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[10]邹汝平,李晓斌,张为华.固体发动机内弹道计算不确定性研究[J].固体火箭技术,2009,(01):33.

更新日期/Last Update: 2019-03-21
PDF下载 分享