[1]卢杰,袁化成,王颖昕,等.一种外并联式TBCC变几何进气道的设计[J].固体火箭技术,2019,42(01):119-127.
 LU Jie,YUAN Huacheng,WANG Yingxin,et al.Design of an over/under type TBCC variable geometry inlet[J].Journal of Solid Rocket Technology,2019,42(01):119-127.
点击复制

一种外并联式TBCC变几何进气道的设计

参考文献/References:

[1]Curran E T,Murthy S N B.Scramjet propulsion-progress in astronautics and aeronautics[M].AIAA,2001.

[2]Canan,James W.Breathing new hope into hypersonics[J].Aerospace America,2007(10):26-31.
[3]张华军,郭荣伟,李博.TBCC 进气道研究现状及其关键技术[J].空气动力学报,2010,28(5):613-620.ZHANG Huajun,GUO Rongwei,LI Bo.Research status of TBCC inlet and its key technologies[J].ACTA Aerodynamica Sinica,2010,28(5):613-620.
[4]Cockrell C E,Auslender A H,Guy R W,et al.Technology roadmap for dual-mode scramjet propulsion to support space-access vision vehicle development[R].AIAA 2002-5188.
[5]陈大光.高超声速飞行与TBCC方案简介[J].航空发动机,2006,32(3):10-13.CHEN Daguang.Brief introduction of hypersonic flight and TBCC concept[J].Aeroengine,2006,32(3):10-13.
[6]Bobby W Sanders,Lois J Weir.Aerodynamic design of a dual-flow Mach 7[R].NASA-2008-215214.
[7]Sanders B W,Weir L J.Aerodynamic design of a dual-flow Mach 7 hypersonic inlet system for a turbinebased combinedcycle hypersonic propulsion system [R].NASA/CR-2008-21-5214,2008.
[8]Testing of the NASA hypersonics project’s combined cycle engine large scale inlet mode transition experiment (CCE LIMX) [R].NASA/TM-02012-217217,2012.
[9]John W Slater,John D Saunders.Computational fluid dynamics (CFD) simulation of hypersonic turbinebased combinedcycle (TBCC) inlet mode transition [R].NASA/TM-2010-216362,2010.
[10]王德鹏,庄逸,谭慧俊.一种组合发动机变几何进气道的流动及工作特性研究[C]//第二届组合动力学术交流会文集.2013:109-121.WANG Depeng,ZHUANG Yi,TAN Huijun.Study on a combination of variable geometry engine inlet flow and operating characteristics[C]//The 2nd Combination Power Symposium.2013:109-121.
[11]王亚岗,袁化成,郭荣伟.一种外并联型涡轮基组合发动机进气系统方案[J].航空动力学报,2013,28(8):1851-1857.[JP3]WANG Yagang,YUAN Huacheng,GUO Rongwei.Over/under type inlet scheme for turbine-based combined cycle engine[J].Journal of Aerospace Power,2013,28(8):1851-1857.
[12]李龙,李博,梁德旺,等.涡轮基组合循环发动机并联式进气道的气动特性[J].推进技术,2008,29(6):667-672.LI Long,LI Bo,LIANG Dewang,et al.Aerodynamic characteristics of over/under inlet for turbine based combined cycle engine[J].Journal of Propulsion Technology,2008,29(6): 667-672.
[13]陈敏,唐海龙,刘大响,等.最大飞行马赫数3.5的吸气式动力方案初步研究[J].航空动力学报,2009,24(7):1564-1569.[JP2]CHEN Min,TANG Hailong,LIU Daxiang,et al.Conceptual design of Mach number 3.5 air-breathing propulsion system[J].Journal of Aerospace Power,2009,24(27):1564-1569.
[14]袁化成,章欣涛,童泽润,等.外并联涡轮基组合循环进气道模态转换技术研究[J].航空科学技术,2016,26(11):37-42.YUAN Huacheng,ZHANG Xintao,TONG Zerun,et al.Research of over/under type TBCC inlet model transition technology[J].Aeronautical Science & Technology,2016,26(11):37-42.
[15]王绍清,华清.涡扇冲压组合发动机等q特性及竭力点选取[J].推进技术,1989,10(3):20-24.WANG Shaoqing,HUA Qing.The ATR/RJ engine performance at constant dynamic pressure and the consideration of transition conditon[J].Journal of Propulsion Technology,1989,10(3):20-24.[16]袁化成,刘君,郭荣伟.一种内并联式TBCC进气道模态转换过程流动特性分析[C]//第二届组合动力学术交流会文集.2013:90-100.LIU Jun,YUAN Huacheng,GUO Rongwei.Analysis of an over/under TBCC inlet mode transition flow characteristic[C]//The 2nd Combination Power Symposium.2013:99-100.
[17]刘君,袁化成,郭荣伟.内并联式TBCC进气道模态转换过程流动特性分析[J].宇航学报,2016,37(4):461-469.LIU Jun,YUAN Huacheng,GUO Rongwei.Analysis of over/under TBCC inlet mode transition flow characteristic[J].Journal of Astronautics,2016,37(4):461-469.
[18]Liu J,Yuan H,Hua Z,et al.Experimental and numerical investigation of smooth turbine based combined cycle inlet mode transition[J].Aerospace Science and Technology,2017 (60):124-130.
[19]Liu J,Yuan H,Ge N.The flowfield and performance analyses of turbine-based combined cycle inlet mode transition at critical/subcritical conditions[J].Aerospace Science and Technology,2017(69):485-494
[20]Seddon J,GoldSmith E L.Intake aerodynamics,2nd ed.[M].Revised by E.L.GoldSmith,Blackwell Science Ltd,Oxford,1999,Chaps.10,12.

相似文献/References:

[1]李宇飞,何国强,刘佩进.一种辅助高超音速进气道起动方法研究[J].固体火箭技术,2007,(5):392.
[2]董家峰,李进贤,崔金平,等.二元混压超音速进气道数值模拟与试验研究[J].固体火箭技术,2008,(2):129.
[3]王筱蓉,姜根柱,周长省.冲压增程弹进气道型面气动优化研究[J].固体火箭技术,2009,(01):58.
[4]李理,陈小庆,杨涛,等.大攻角条件下的二维进气道型面优化设计[J].固体火箭技术,2009,(04):418.
[5]徐东来,陈凤明,蔡飞超,等.固体火箭冲压发动机设计技术问题分析[J].固体火箭技术,2010,(02):142.
[6]邵明玉,王志刚,陈凤明.复合调节固冲发动机性能分析[J].固体火箭技术,2018,41(04):481.
[7]蒲晓航,李江,刘洋,等.基于角度约束松弛的固体ATR进气道改进设计[J].固体火箭技术,2016,(02):166.
[8]刘晓伟,石磊,刘佩进,等.RBCC发动机引射模态进气道特性研究[J].固体火箭技术,2016,(05):601.
[9]武乐乐,何国强,秦飞,等.中心支板钝化对RBCC进气道性能的影响[J].固体火箭技术,2016,(05):606.
[10]张晓旻,杨石林,李璞.进气道堵盖打开过程数值模拟[J].固体火箭技术,2017,40(03):307.[doi:10.7673/j.issn.1006-2793.2017.03.007]
 [J].Journal of Solid Rocket Technology,2017,40(01):307.[doi:10.7673/j.issn.1006-2793.2017.03.007]

更新日期/Last Update: 2019-03-21
PDF下载 分享