[1]王立武,田维平,郭运强,等.固体火箭发动机喷管喉衬烧蚀研究进展[J].固体火箭技术,2019,42(02):135-142.
 WANG Liwu,TIAN Weiping,GUO Yunqiang,et al.Progress on nozzle throat erosion in solid rocket motor[J].Journal of Solid Rocket Technology,2019,42(02):135-142.
点击复制

固体火箭发动机喷管喉衬烧蚀研究进展

参考文献/References:

[1]杨飒,李江,王文斌,等.C /C喉衬烧蚀性能的实验研究[J].固体火箭技术,2009,32(3):284-287.YANG Sa,LI Jiang,WANG Wenbin,et al.Experimental investigation on ablation properties ot C/C throat-insert[J].Journal of Solid Rocket Technology,2009,32(3):284-287.[2]黄海明,杜善义,吴林志,等.C/C复合材料烧蚀性能分析[J].复合材料学报,2001,18(3):76-80.HUANG Haiming,DU Shanyi,WU Linzhi,et al.Analysis of the ablation of C/C composites[J].Acta Materiae Compositae Sinica,2001,18(3):76-80.[3]张红波,尹健,熊翔.C/C复合材料烧蚀性能的研究进展[J].材料导报,2005,19(7):97-103.ZHANG Hongbo,YIN Jian,XlONG Xiang.Researeh and development of the ablation performance of C/C composites[J].Materials Review,2005,19(7):97-103.[4]左劲旅,张红波,熊翔,等.喉衬用炭/炭复合材料研究进展[J].碳素,2003(2):7-10.ZUO Jinlu,ZHANG Hongbo,XIONG Xiang,et al.Evolve of a research of C/C composites used for nozzle throat[J].Carbon,2003(2):7-10.[5]陈林泉,王立武,刘勇琼,等.边界层控制方法降低喷管喉衬烧蚀研究综述[J].固体火箭技术,2014,37(3):324-329.CHEN Linquan,WANG Liwu,LIU Yongqiong,et al.Review of nozzle boundary-layer cotrol system for mitigation of nozzle throat erosion[J].Journal of Solid Rocket Technology,2014,37(3):324-329.[6]Piyush Thakre,Vigor Yang.A comprehensive model to predict and mitigate the erosion of carbon-carbon/graphite rocket nozzles[C]//43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,2007-5777.[7]曹军,郭颜红,邢强.高过载条件下固体火箭发动机工作稳定性研究[J].航空兵器,2014(1):33-36.CAO Jun,GUO Yanhong,XING Qiang.Research on the working stabilization of solid rocket motor under high overload[J].Aero Weaponry,2014(1):3336.[8]武渊,何国强,孙展鹏,等.过载对固体发动机性能影响试验研究[J].固体火箭技术,2010,33(5):511-514.WU Yuan,HE Guoqiang,SUN Zhanpeng,et al.Experiment study of effects induced by overload on SRM performance[J].Journal of Solid Rocket Technology,2010,33(5):511-514.[9]査柏林,黄定园,乔素磊.C/C复合材料烧蚀试验及烧蚀机理研究[J].固体火箭技术,2013,36(5):692-696.ZHA Bailin,HUANG Dingyuan,QIAO Sulei.Research on ablation test and ablative mechanism of carbon/carbon composite material[J].Journal of Solid Rocket Technology,2013,36(5):692-696.[10]王书贤,陈林泉,刘勇琼.C /C喉衬材料烧蚀试验方法研究[J].固体火箭技术,2007,30(5):170-172.WANG Shuxian,CHEN Linquan,LIU Yongqiong.Investigation on ablative property test method for C /C throat insert material[J].Journal of Solid Rocket Technology,2007,30(5):170-172. [11]王磊,何国强,李江.粒子侵蚀对C/C材料烧蚀性能影响研究[J].西北工业大学学报,2012,30(3):320-325.WANG Lei,HE Guoqiang,LI Jiang,et al.Exploring effect of particles on ablation performance of C/C material[J].Journal of Northwestern Polytechnical University,2012,30(3):320-325.[12]田维平,许团委,王健儒.过载下燃烧室粒子特性与绝热层烧蚀研究进展[J].固体火箭技术,2015,38(1):30-66.TIAN Weiping,XU Tuanwei,WANG Jianru.Progress on condensed-phase particle characteristic and insulation ablation in SRM chamber with flight overload[J].Journal of Solid Rocket Technology,2015,38(1):30-66.[13]Brian Evans,Peter J Ferrara,Jeffrey D Moore,et al.Evaluation of nozzle erosion characteristics utilizing a rocket motor simulator[R].AIAA 2006-5245.[14]Brian Evans,Kenneth K Kuo,Peter J Ferrara,et al.Nozzle throat erosion characterization study using a solidpropellant rocket motor simulator[C]//43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,2007-5776.[15]刘建军,李铁虎,郝志彪.喉衬热环境与碳/碳复合材料的烧蚀[J].宇航材料工艺,2005(1):42-48.LIU Jianjun,LI Tiehu,HAO Zhibiao.Throat thermal ambient and ablation of C/C composites[J].Aerospace Materials and Technology,2005(1):42-48.[16]Piyush Thakre,Vigor Yang.Chemical erosion of carbon-carbon/graphite nozzles in solid-propellant rocket motors[J].Journal of Propusion and Power,2008,24(4):822-833.[17]王立武.边界层控制方法降低喷管喉衬烧蚀研究[D].西安:航天动力技术研究院,2015.WANG Liwu.The investigation of boundary layer control system to mitigate nozzle throat erosion[D].Xian: The Fourth Academy of CASC,2015.[18]Tong H,Hartman G J,Chu E K,et al.AFRPL graphite performance prediction program-improved capability for the design and ablation performance prediction of advanced air force solid propellant rocket nozzles[R].AFRPL-TR-76-70,1976.[19]Klager K.The interaction of the efflux of solid propellants with nozzle materials[J].Propellants and Explosives,1977(2):55-63. [20]Keswani S T,Kuo K K.Validation of an aerothermochemical model for graphite nozzle recession and heat-transfer processes[C]//Chemical and Physical Processes in Combustion,1984 Fall Technical Meeting,Clearwater Beach,FL,USA:561-564.[21]Keswani S T,Andiroglu E,Campbell J D,et al.Recession behavior of graphitic nozzes in simulated rocket motors[J].Journal of Spacecraft and Rockets,1985,22(4):396-397.[22]Borie V,Brulard J,Lengellet G.Aerothermochemical analysis of carbon-carbon nozzle regression in solid-propellant rocket motors[J].Journal of Propulsion,1989,5(6):665-673. [23]Bradley D,Dixon-Lewis G,Habik S El-Din,et al.Oxidation of graphite powder in flame reaction zones[C]// 20th Symposium (International) on Combustion,1984:931-940.[24]Thakre P K,Yang V.Graphite nozzle material erosion in solid-propellant rocket motors[C]//45st AIAA Aerospace Sciences Meeting and Exhibit,2007-778.[25]Lachaud J,Vignoles G L,Gohyeneche J M,et al.Ablation in carbon/carbon composites:microscopic observations and 3D numerical simulation of surface roughness evolution[J].Ceramic Transaction,2006,191:149-160.[26]Lachaud J,Aspa Y,Vignoles G L.Analytical modeling of thesteady state ablation of a 3D C/C composite[J].International Journal of Heat and Mass Transfer,2008,51:2614-2627. [27]Lachaud J,Vignoles G L.A Brownian motion technique to simulate gasification and its application to C/C composite ablation[J].Computational Materials Science,2009,44:1034-1041.[28]Vignoles G L,Lachuad J,Aspa Y,et al. Ablation of carbon-based materials:multiscale roughness modeling[J].Composites Science and Technology,2009,69:1470-1477.[29]Vignoles G Y,Aspa Y,Quintard M.Modeling of carbon-carbon composite ablation in rocket nozzle[J].Composites Science and Technology,2010,70:1303-1311.[30]何洪庆.固体火箭喷管烧蚀与传热的基本问题[J].推进技术,1993(3):22-35.HE Hongqing.Some essential problems with ablation and heat-conduction in solid rocket motor[J].Journal of Propulsion Technology,1993(3):22-35.[31]何洪庆,周旭.固体火箭喷管中的烧蚀控制机制[J].推进技术,1993(4):35-41.HE Hongqing,ZHOU Xu.Ablative control mechanism in solid rocket nozzle[J].Journal of Propulsion Technology,1993(4):35-41.[32]黄海明,徐晓亮,姜贵庆.固体火箭喷管烧蚀控制机制的判别[J].中国科学E辑:技术科学,2009,39(9):1558-1563.HUANG Haiming,XU Xiaoliang,JIANG Guiqing.Discrimination for ablative control mechanism in solid-propellant rocket nozzle[J].Science in China Press,2009,39(9):1558-1563.[33]张斌,刘宇,王长辉,等.固体火箭发动机喷管烧蚀控制机制判别新方法[J].中国科学:技术科学,2010,40(12):1503-1508.ZHANG Bin,LIU Yu,WANG Changhui,et al.New discrimination method for ablative control mechanism in solid-propellant rocket nozzle[J].Science in China Press,2010,40(12):1503-1508.[34]PENG Lina,HE Guoqiang,LI Jiang,et al.Effect of combustion gas mass flow rate on carbon/carbon composite nozzle ablation in a solid rocket motor[J].Carbon,2012,50:1554-1562. [35]QIN Fei,PENG Lina,HE Guoqiang,et al.Oxidation kinetics and mechanism of four-direction carbon/carbon composites and their components in carbon dioxide at high temperature[J].Corrosion Science,2013,77:164-176.[36]]QIN Fei,PENG Lina,HE Guoqiang,et al.Oxidation kinetics and mechanism of carbon/carbon composites and their in water vapour at high temperatures[J].Corrosion Science,2015,90:340-346. [37]QIN Fei,PENG Lina,LI Jiang,et al.Numerical simulations of multiscale ablation of carbon/carbon throat with morphology effects[J].AIAA Journal,2017,55(10):3476-485.[38]付鹏,蹇泽群,张钢锤,等.发动机喷管喉衬烧蚀及热结构工程计算[J].固体火箭技术,2005,28(1):15-9.FU Peng,JIAN Zequn,ZHANG Gangchui.Engineering calculation for erosion and thermal structure of throatinsert of a SRM nozzle[J].Journal of Solid Rocket Technology,2005,28(1):15-9.[39]黄海明,端木正,范振波,等.基于热化学轴对称烧蚀的仿真[J].北京交通大学学报,2010,34(4):98-01.HUANG Haiming,DUAN Muzheng,FAN Zhenbo,et al.Simulation for ablation of axial symmetry based on thermochemistry[J].Journal of Beijing Jiaotong University,2010,34(4):98-01.[40]汪海滨,李鑫.轴编C/C复合材料喉衬的多尺度烧蚀分析方法[J].固体火箭技术,2017,40(3):295-01.WANG Haibin,LI Xin.Multiscale approach to ablation modeling of in-lain C/C composite for nozzle throat[J].Journal of Solid Rocket Technology,2017,40(3):295-01.[41]Liggett Nicholas D,Menon S.Simulation of nozzle erosion process in a solid propellant rocket motor[R]. AIAA 2007-776.[42]Niu Yangyao,Tsai Chih shung.Numerical modeling of erosion on the metallic surface by the dilute particulate flow impact[C]//30th AIAA Fluid Dynamics Conference,1999-3761.[43]Palaninathan R,Bindu S.Modeling of mechanical ablation in thermal protection systems[J].Journal of Spacecraft and Rockets,2005,42(6):971-979.[44]Kazuma Kato,Kazuyuki Ueno, Keisuke Sawada.Estimation of mechanical erosion at nozzle inlet by multiphase flow simulation in solid rocket motor considering aluminum droplets and alumina mist[C]//45th AIAA Aerospace Sciences Meeting and Exhibit,2007-341.[45]Lee TaeHo.Experimental study of the nozzle surface regression rate to the heat transfer[J].Journal of Propulsion and Power,2006,22(1):221-223. [46]Liggett N D,Menon S.Time-dependent nozzle erosion process in a solid propellant rocket motor[C]//43rd AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit,2007-5638.[47]刘叔渭.碳/碳复合材料喉衬的烧蚀计算[J].推进技术,1987(5):14-20.LIU Shuwei.The calculation of carbon-carbon nozzle throat erosion[J].Journal of Propulsion Technology,1987(5):14-20.[48]郑亚,陈军,鞠玉涛,等.固体火箭发动机传热学[M].北京:北京航空航天大学出版社,2006.ZHENG Ya,CHEN Jun,JU Yutao,et al.The heat transfer of solid rocket motor[M].Beijing:Beijing University of Aeronautics and Astronautics Press,2006.[49]徐晓亮,黄海明,孟松鹤.高温两相流对碳/碳复合材料冲刷研究[C]//第十五届全国复合材料学术会议,2008:1301-1304.XU Xiaoliang,HUANG Haiming,MENG Songhe.Research on the flushing effects of hyperthermia two-phase flow exerted on the carbon-carbon composite[C]//15st Composite Materials Conference,2008:1301-1304. [50]王磊,何国强,李江,等.颗粒冲刷对C/C材料烧蚀影响的实验研究[J].推进技术,2013,34(2):213-218.WANG Lei,HE Guoqiang,LI Jiang,et al.Experimental investigation on C/C material ablation by particle erosion[J].Journal of Propulsion Technology,2013,34(2):213-218.[51]LI Qiang,LI Jiang,HE Guoqiang,et al.Erosion of carbon/carbon composites using a lowvelocity,high particleconcentration twophase Jet in a solid rocket motor[J].Carbon,2014,67:140-145.

相似文献/References:

[1]李娟,李江,王毅林,等.喉栓式变推力发动机性能研究 [J].固体火箭技术,2007,(6):505.
[2]尤军峰,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,(2):173.
[3]陈林泉,毛根旺,张胜勇.高能固体火箭发动机爆炸冲击波毁伤效应研究[J].固体火箭技术,2008,(6):588.
[4]白宏伟,尤军峰,张铎,等.级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析[J].固体火箭技术,2008,(6):595.
[5]陈林泉,毛根旺,陈军涛.采用高低燃温组合装药降低喷管内表面温度和烧蚀研究[J].固体火箭技术,2008,(6):599.
[6]苑博,刘勇琼,尤军峰,等.轴压载荷作用下全复合材料裙与壳体搭接区的结构分析[J].固体火箭技术,2008,(6):629.
[7]樊建龙,唐金兰,李进贤,等.固体火箭发动机点火瞬间火焰传播模型比较研究[J].固体火箭技术,2008,(6):575.
[8]窦毅芳,刘飞,张为华.基于张量积函数的固体火箭发动机性能散布分析[J].固体火箭技术,2008,(6):579.
[9]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[10]邹汝平,李晓斌,张为华.固体发动机内弹道计算不确定性研究[J].固体火箭技术,2009,(01):33.

更新日期/Last Update: 2019-05-05
PDF下载 分享