[1]张磊.大水深火箭发动机尾流场数值模拟[J].固体火箭技术,2019,42(02):159-163.
 ZHANG Lei.Numerical simulation of tail flow field for underwater solid rocket motor[J].Journal of Solid Rocket Technology,2019,42(02):159-163.
点击复制

大水深火箭发动机尾流场数值模拟

参考文献/References:

[1]唐嘉宁,李世鹏,王宁飞.水下固体火箭发动机的负推力现象研究[J].固体火箭技术,2012,35(3):325-329.TANG Jianing,LI Shipeng,WANG Ningfei.Study on the negative thrust of the underwater solid rocket engines[J].Journal of Solid Rocket Technology,2012,35(3):325-329.[2]张有为,王晓宏.导弹水下点火推力峰值问题的数值研究[J].应用力学学报,2007,24(1):298-301.ZHANG Youwei,WANG Xiaohong.Numerical study on the peak thrust of the missile launching under water[J].Journal of Applied Mechanics,2007,24(1):298-301.[3]Labotz R J.Hydrodynamic consideration and limitations in submerged rocket firings[J].Journal of spacecraft and Rocket,1965,2(3):320-324.[4]贾有军,张胜敏,尤军锋,等.固体发动机水下点火尾流变化过程试验研究[J].固体火箭技术,2015,38(5):660-663.JIA Youjun,ZHANG Shengmin,YOU Junfeng,et al.Experimental research on the changing process of underwater ignition wake of solid rocket motor[J].Journal of Solid Rocket Technology,2015,38(5):660-663.[5]傅德彬,于殿君,张志勇.气密条件下水下热发射流场数值研究[J].固体火箭技术,2011,34(2):135-139.FU Debin,YU Dianjun,ZHANG Zhiyong.Numerical simulation of complex flow field for missile launched under-water under gas proof conditions[J].Journal of Solid Rocket Technology,2011,34(2):135-139.[6]邹延兵,卓长飞,封锋.火箭发动机水下启动过程流场数值模拟研究[J].弹道学报,2016,28(4):30-35.ZOU Yanbing,ZHUO Changfei,FENG Feng.Numerical simulation of flow field for underwater starting process of rocket engine[J].Journal of Ballistics,2016,28(4):30-35.[7]朱卫兵,陈宏,黄舜.水下高速射流气泡变化过程数值研究[J].推进技术,2010,31(4):496-502.ZHU Weibing,CHEN Hong,HUANG Shun.Numerical study of the process of the evolution of bubble of high-speed jet underwater[J].Journal of Propulsion Technology,2010,31(4):496-502.[8]周良梁,余永刚,刘东尧,等.水下火炮气幕式发射过程中燃气射流与液体工质相互作用特性研究[J].兵工学报,2016,37(8):1373-1378.ZHOU Liangliang,YU Yonggang,LIU Dongyao,et al.Research on gas-liquid interaction characteritics during the gas curtain launching process of underwater gun[J].Acta Armamenrii,2016,37(8):1373-1378.[9]王乐勤,郝宗睿,吴大转.水下气体射流初期流场的数值研究[J].工程热物理学报,2009,30(7):1132-1135.WANG Leqin,HAO Zongrui,WU Dazhuan.Numerical simulation of initial flow field of underwater gas jet[J].Journal of Engineering Thermophysics,2009,30(7):1132-1135.[10]蒋炎坤,褚开星.基于VOF方法发动机水下排气气泡特性研究[J].华中科技大学学报,2015,43(10):10-14.JIANG Yankun,CHU Kaixing.Research of characteristic of exhaust bubbles underwater using VOF method on engines[J].Journal Huazhong University of Science and Technology,2015,43(10):10-14.[11]唐云龙,李世鹏,刘筑,等.水下火箭发动机的推力特性[J].航空动力学报,2017,32(2):477-485.TANG Yunlong,LI Shipeng,LIU Zhu,et al.Underwater thrust characteristic of solid rocket motor[J].Journal of Aerospace Power,2017,32(2):477-485.

相似文献/References:

[1]傅德彬,姜毅.某导弹易碎盖的开启过程[J].固体火箭技术,2007,(4):275.
[2]张光喜,周为民,张钢锤,等.固体火箭发动机尾焰流场特性研究[J].固体火箭技术,2008,(1):19.
[3]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[4]陈晓龙,何国强,刘佩进,等.潜入式喷管对燃烧室中压力振荡的影响[J].固体火箭技术,2010,(03):252.
[5]马艳丽,姜毅,郝继光,等.固体发动机燃气射流对发射平台冲击效应研究[J].固体火箭技术,2010,(04):373.
[6]陈健,吴继平,王振国,等.高空模拟试车台主被动引射方案数值研究[J].固体火箭技术,2011,(01):126.
[7]傅德彬,于殿君,张志勇.气密条件下水下热发射流场数值研究[J].固体火箭技术,2011,(02):135.
[8]马艳丽,姜毅,王伟臣,等.同心筒发射过程燃气射流冲击效应研究[J].固体火箭技术,2011,(02):140.
[9]刘书杰,陈刚,左群.火箭发动机推力测试补偿修正[J].固体火箭技术,2012,(06):826.
[10]杨风波,马大为,任杰,等.新型车载同心筒流场机理与热环境研究[J].固体火箭技术,2014,(03):301.

更新日期/Last Update: 2019-05-05
PDF下载 分享