[1]臧充光,刘开国,郭阳,等.GXTI-1微纳米微粒高效隔热复合材料的性能[J].固体火箭技术,2019,42(02):224-228.
 ZANG Chongguang,LIU Kaiguo,GUO Yang,et al.Properties of GXTI1 micro-nanoparticles high-efficiency thermal insulation composites[J].Journal of Solid Rocket Technology,2019,42(02):224-228.
点击复制

GXTI-1微纳米微粒高效隔热复合材料的性能

参考文献/References:

[1]郭亚林,崔红,王秀云.固体发动机用隔热涂料增强改性研究[J].固体火箭技术,2008,31(3):291-294.GUO Yalin,CUI Hong,WANG Xiuyun.Research on reinforcing modification of thermal insulation coating for solid motor[J].Journal of Solid Rocket Technology,2008,31(3):291-294.[2]贾晓龙,李鹏,于运花,等.预分散酚醛中空微球对三元乙丙橡胶绝热层性能的影响及梯度化绝热层的研究[J].固体火箭技术,2010,33(1):99-103.JIA Xiaolong,LI Peng,YU Yunhua,et al.Effects of pre-dispersed hollow phenolic micro-spheres on properties of EPDM thermal insulator and study on functionally graded thermal insulator[J].Journal of Solid Rocket Technology,2010,33(1):99-103.[3]杨栋.硅橡胶基绝热材料及其热化学烧蚀机理研究[D].长沙:国防科技大学,2013.YANG Dong.Silicone rubber based insulation materials and its thermochemical ablation mechanism[D].Changsha:National University of Defense Technology,2013.[4]马秀峰,李志永,郑日恒,等.冲压发动机用梯度隔热层隔热性能研究[J].推进技术,2015,36(3):429-435.MA Xiufeng,LI Zhiyong,ZHENG Riheng,et al.Investigation on insulation performance of gradient thermal insulation for ramjet[J].Journal of Propulsion Technology,2015,36(3):429-435.[5]于秀山.正交试验设计方法在测试用例设计中的应用[J].计算机工程与应用,2004,40(20):62-63,76.YU Xiushan.The application of orthogonal testing method in test case design[J].Computer Engineering and Applications,2004,40(20):62-63,76.[6]梁基照.高分子复合材料传热学导论[M].广州:华南理工大学出版社,2013.LIANG Jizhao.Introduction to heat transfer of polymer composites[M].Guangzhou:South China University of Technology Press,2013.[7]Skochdopoe R E.The thermal conductivity of foam plastics[J].Engineering Progress,1961.[8]Hamdani S,Longuet C,Perrin D,et al.Flame retardancy of silicone-based materials[J].Polymer Degradation and Stability,2009,94(4):465-495. [9]Lee G W,Park M,Kim J,et al.Enhanced thermal conductivity of polymer composites filled with hybrid filler[J].Composites Part A:Applied Science and Manufacturing,2006,37(5):727-734.[10]王经武.塑料改性技术[M].北京: 化学工业出版社,2004.WANG Jingwu.Plastic modification technology[M].Beijing:Chemical Industry Press,2004.[11]彭璇.三维织物的成型加工及其纳米复合材料的性能研究[D].武汉:武汉纺织大学,2015.PENG Xuan.Study on the performance of 3D fabric forming peocessing and nano composite material[D].Wuhan:Wuhan Textile University,2015.

相似文献/References:

[1]华六五,梁国正,李飞,等.大气等离子喷涂纳米ZrO2涂层工艺与性能研究[J].固体火箭技术,2007,(2):155.
[2]胡江华,常新龙,孟松鹤,等.C-C扩张段材料性能设计[J].固体火箭技术,2012,(02):238.
[3]申连华,李国平,罗运军,等.高能球磨法制备Al / B / Fe2 O3纳米复合含能材料[J].固体火箭技术,2014,(02):233.[doi:10.7673/ j.issn.1006⁃2793.2014.02.017]
 ,,et al.Preparation of Al / B / Fe2 O3 nano?composite energetic materials by high energy ball milling[J].Journal of Solid Rocket Technology,2014,(02):233.[doi:10.7673/ j.issn.1006⁃2793.2014.02.017]
[4]陆晓峰,徐永杰.新型双楔角环垫结构参数显著性分析与设计[J].固体火箭技术,2014,(02):247.[doi:10.7673/ j.issn.1006⁃2793.2014.02.020]
 .Significant analysis and design on the structure parameters of a new double wedge angle ring gasket[J].Journal of Solid Rocket Technology,2014,(02):247.[doi:10.7673/ j.issn.1006⁃2793.2014.02.020]
[5]刘少波,赵良玉.超视距防空导弹中末制导交接班时的目标捕获概率研究[J].固体火箭技术,2016,(05):723.
[6]庞菲,介玉洁,崔红,等. 基于正交试验的天然气CVI工艺优化[J].固体火箭技术,2018,41(01):102.
 PANG Fei,JIE Yujie,CUI Hong,et al. Processing parameters optimization of CVI of natural gas based on orthogonal test[J].Journal of Solid Rocket Technology,2018,41(02):102.

更新日期/Last Update: 2019-05-06
PDF下载 分享