[1]沈镇,秦滢杰,陈书华,等.炭纤维/聚醚醚酮复合材料的激光原位成型工艺探究[J].固体火箭技术,2019,42(02):229-233.
 HEN Zhen,QIN Yingjie,CHEN Shuhua,et al.Study on the laser insitu winding process of carbon fiber reinforced PEEK composite[J].Journal of Solid Rocket Technology,2019,42(02):229-233.
点击复制

炭纤维/聚醚醚酮复合材料的激光原位成型工艺探究

参考文献/References:

[1]陈书华,韩建平,王喜占,等.连续碳纤维增强聚醚醚酮预浸带成型工艺及性能[J].宇航材料工艺,2016(4):48-51.Chen S H,Han J P,Wang X Z,et al.Preparation and properties of continuous carbon fiber reinforced polyetheretherketone-Prepreg [J].Aerospace Materials and Technology,2016(4):48-51.[2]迪力穆拉提?阿卜力孜,段玉岗,李涤尘,等.树脂基复合材料原位固化制造技术概述[J].材料工程,2011,(4):84-90.Abulizi D,Duan Y G,Li D C,et al.Overview of in-situ curing manufacturing technology for resin matrix composites [J]. Journal of Materials Engineering,2011(4):84-90.[3]Pistor C M,Yardimci M A,Güceri S I.On-line consolidation of thermoplastic composites using laser scanning[J].Composites Part A:Applied Science and Manufacturing,1999,30(10):1149-1157. [4]Sonmez F O,Akbulut M.Process optimization of tape placement for thermoplastic composites[J].Composites Part A,2007,38(9):2013-2023.[5]李伟,姚树勇,陈平,等.连续纤维增强 PEK-C 复合材料缠绕成型工艺及性能研究[J].固体火箭技术,2011,34(2):261-264.[JP3]Li W,Yao S Y,Chen P,et al.Study on winding process and properties of continuous fiber reinforced PEK-C composites [J].Journal of Solid Rocket Technology,2011,34(2):261-264.[6]韩振宇,李玥华,富宏亚,等.热塑性复合材料纤维铺放工艺的研究进展[J].材料工程,2012 (2):91-96.Han Z Y,Li Y H,Fu H Y,et al.Thermoplastic composites fiber placement process research [J].Journal of materials engineering,2012 (2):91-96.[7]Reichardt J M,Baran I,Akkerman R.Optical process model for laser-assisted tape winding[C]//17th European Conference on Composite Materials.2016.[8]Hosserni S M A,Barab I,Akkerman R.Thermal modeling strategies for laser assisted tape winding process[A].21st International Conference on Composite Materials,2017. [9]Cole K C,Casella I G.Fourier transform infrared spectroscopic study of thermal degradation in film of poly(ether ether ketone)[J].Thermochimca Acta,1992,211:209-228.[10]李伟,姚树勇,陈平,等.炭纤维/纳米 TiO2/PEK-C 复合材料 NOL 环的制备及性能研究[J].固体火箭技术,2013,36(3):390-393.[JP3]Li W,Yao S Y,Chen P,et al. Fabrication and properties of NOL rings of carbon fiber/nano-TiO2/ PEK-C composites [J]. Journal of Solid Rocket Technology,2013,36(3):390-393.

相似文献/References:

[1]李雅娣,张钢锤,吴 平,等.炭纤维/环氧树脂复合材料层板连续激光烧蚀数值计算[J].固体火箭技术,2008,(3):262.
[2]张家雷,刘仓理,谭福利,等.激光辐照下黑索今固相与气相反应模型对比[J].固体火箭技术,2016,(05):638.

更新日期/Last Update: 2019-05-06
PDF下载 分享