[1]张世杰,王汝敏,刘宁,等.两种纺丝工艺T800级炭纤维复合材料容器性能对比[J].固体火箭技术,2019,42(02):239-244.
 ZHANG Shijie,WANG Rumin,LIU Ning,et al.Comparative study on vessel properties of T800 carbon fibers by two spinning processes[J].Journal of Solid Rocket Technology,2019,42(02):239-244.
点击复制

两种纺丝工艺T800级炭纤维复合材料容器性能对比

参考文献/References:

[1]刘卫丹,陈俊林,李阳,等.国产800 级碳纤维表面状态及其复合材料界面性能[J].材料工程,2016,44(10):88-93.LIU W D,CHEN J L,LI Y,et al.Surface state of domestic T800grade carbon fibers and interface property of composites[J].Journal of Materials Engineering,2016,44(10):88-93.[2]ZHONG Y J,BIAN W F,WANG M L.The effect of nanostructure on the tensile modulus of carbon fibers[J].J Mater Sci,2016,51(7):3564-3579.\[3]郭慧,黄玉东,刘丽.T300和国产碳纤维本体的力学性能对比及其分析[J].宇航学报,2009,30(5):2068-2072.GUO H,HUANG Y D,LIU L.Comparison of mechanical property of unsized T300 and chinese carbon fibers[J].Journal of Astronautics,2009,30(5):2068-2072.[4]向小波,蒋永凡,程勇.聚丙烯腈基碳纤维及其在固体火箭发动机壳体上的应用[J].纤维复合材料,2015(4):23-28.XIANG X B,JIANG Y F,CHENG Y.Review of the application of polyacrylonitrile-based carbon fiber in solid rocket motor cases[J].Fiber Composites,2015(4):23-28.[5]李健芳,张娅婷,孙宏杰.国产高性能碳纤维复合材料界面性能研究[J].玻璃钢复合材料,2013(5):28-31. LI J F,ZHANG Y T,SUN H J.Study on interfaces of high performance carbon fiber composites[J].Fiber Reinforced Plastics/Composites,2013(5):28-31.[6]井敏,谭婷婷,王成国.PAN基碳纤维的微观结构与力学性能相关性分析[J].航空材料学报,2013,33(1):78-85.JING M,TAN T T,WANG C G.Correlation between microstructure and mechanical properties of PAN-based carbon fiber[J].Journal of Aeronautical Materials,2013,33(1):78-85.[7]钟云娇,边文凤.PAN基碳纤维微晶结构对拉伸强度的影响[J].材料工程,2017,45(12):37-42.ZHONG Y J,BIAN W F.Effect of crystallites structure of PAN-based carbon fibers on tensile strength[J].Journal of Materials Engineering,2017,45(12):37-42.[8]顾红星,王浩静,张淑斌,等.HKT800碳纤维微观结构与性能.材料科学与工艺.2016,24(3):47-49.GU H X,WANG H J,ZHANG S B,et al.Microstructure and properties of HKT800 carbon fiber[J].Materials Science & Technology,2016,24(3):47-49.[9]WANG L L,LI P,LI L C.Effect of surface properties of T800 carbon fibers on epoxy/fiber interface adhesion [J].Polymers &Polymer Composites,2013,21(9):607-612.[10]ZAFFAR M K,ALI H M,BEN M.The drilling-induced failure mechanisms in T800/924C toughened carbon-epoxy composite materials[J].Journal of Reinforced Plastics and Composites,2014,33:202-211.[11]秦志全,周霞.二甲基亚砜法聚丙烯腈原丝干湿纺与湿纺成型工艺的比较[J].高科技纤维与应用,2016,31(3):15-18.QIN Z Q,ZHOU X.Comparison of DMSO solvent PAN dry jet wet spinning and wet spinning[J].Hi-Tech Fiber & Application,2016,31(3):15-18.[12]徐梁华.PAN干湿法纺丝工艺中原丝的表面沟槽形态[J].高科技纤维与应用,2001,26(2):21-24.XU L H.Surface groove morphology of saw silk in PAN dry-wet spinning process[J].Hi-Tech Fiber & Application,2001,26(2):21-24.[13]程勇,侯晓,张世杰,等.纺丝工艺对炭纤维缠绕复合材料强度转化率的影响[J].固体火箭技术,2017,40(2):239-243.CHENG Y,HOU X,ZHANG S J,et al.Effect of spinning process on carbon fiber wet winding composite strength transformation ratio[J].Journal of Solid Rocket Technology,2017,40(2):239-243.[14]缑林虎,郑锡涛,程勇.平面缠绕炭纤维压力容器大变形有限元分析[J].固体火箭技术,2010,33(2):205-208.GOU L H,ZHENG X T,CHENG Y.Large deformation finite element analysis of planar carbon fiber wound composite pressure vessel[J].Journal of Solid Rocket Technology,.2010,33(2):205-208.

更新日期/Last Update: 2019-05-06
PDF下载 分享