[1]马晓琳,申志彬,崔辉如.固体发动机推进剂/绝热层界面I型脱粘力学行为试验与仿真研究[J].固体火箭技术,2019,42(03):282-289.[doi:10.7673/j.issn.1006-2793.2019.03.003]
 MA Xiaolin,SHEN Zhibin,CUI Huiru.Simulation and experimental study on mechanical behavior of mode Ⅰsolid propellant/insulation interface debonding[J].Journal of Solid Rocket Technology,2019,42(03):282-289.[doi:10.7673/j.issn.1006-2793.2019.03.003]
点击复制

固体发动机推进剂/绝热层界面I型脱粘力学行为试验与仿真研究

参考文献/References:

[1]姜爱民,李高春,黄卫东.固体火箭发动机粘接界面力学性能的有限元计算及参数分析[J].火炸药学报,2012,35(4):54-57.JIANG Aimin,LI Gaochun,HUANG Weidong.Finite element calculation and parameter analysis on mechanical property of solid rocket motor bondline[J].Journal of Explosives and Propellants,2012,35(4):54-57.[2]尹华丽,王清和.界面粘接性能的影响因素[J].固体火箭技术,1998,21(3):40-46.YIN Huali,WANG Qinghe.Influence factors of interface bonding properties[J].Journal of Solid Rocket Technology,1998,21(3):40-46.[3]Barenblatt G I.The formation of equilibrium cracks during brittle fracture.General ideas and hypotheses.Axially-symmetric cracks[J].Journal of Applied Matjematics and Mechanics,1959,23(3):622-636.[4]Dugdale D S.Yielding of steel sheets containing slits[J].Journal of Mechanics and Physics of Solids,1960,8(2):100-104.[5]Park K,Paulino G H,Roesler J R.A unified potential-based - cohesive model of mixed-mode fracture[J].Journal of Mechanics and Physics of Solids,2009,57(6):891-908.[6]Li Y,Sridharan S.Performance of two distinct cohesive layer models for tracking composite delamination[J].International Journal of Fracture,2005,136(1-4):99-131.[7]D 3433-99.Standard test method for fracture strength in cleavage of adhensives in bonded metal joints[S].ASTM,1999.[8]Zhou Q C,Ju Y T,Wei Z,et al.Cohesive zone modeling of propellant and insulation interface debonding[J].The Journal of Adhesion,2014,90(3):230-251.

相似文献/References:

[1]李迎春,何国强,刘佩进,等.粒子冲刷对丁羟推进剂燃烧性能影响试验研究 [J].固体火箭技术,2007,(6):552.
[2]朱敏,卢洪义,肖志斌,等.固体发动机CT图像的一种自动分割方法[J].固体火箭技术,2008,(2):201.
[3]申志彬,唐国金,雷勇军,等.基于Patran二次开发的星形药柱结构分析与设计[J].固体火箭技术,2009,(02):175.
[4]曹琪,李进贤,唐金兰,等.固体发动机点火燃气流动与药柱变形耦合过程数值模拟[J].固体火箭技术,2010,(02):156.
[5]朱敏,卢洪义,李海燕.固体发动机虚拟剖切故障诊断技术研究[J].固体火箭技术,2010,(02):232.
[6]马艳丽,姜毅,郝继光,等.固体发动机燃气射流对发射平台冲击效应研究[J].固体火箭技术,2010,(04):373.
[7]申志彬,李磊,段静波,等.基于Patran二次开发的固体发动机结构分析系统[J].固体火箭技术,2011,(02):171.
[8]赵汝岩,黄志勇,吴昊.某型固体发动机健康状态评估技术研究[J].固体火箭技术,2013,(02):270.
[9]朱敏,于光辉,卢洪义,等.固体发动机体空间边缘检测单体素化方法[J].固体火箭技术,2014,(03):428.
[10]顾志旭,郑坚,彭威,等.固体发动机中轴对称界面端应力奇异性研究[J].固体火箭技术,2014,(04):510.

更新日期/Last Update: 2019-07-11
PDF下载 分享