[1]范兴贵,许进升,陈雄.双脉冲发动机EDPM软隔层含率相关能量限制器的黏超弹本构模型[J].固体火箭技术,2019,42(03):308-313.
 FAN Xinggui,XU Jinsheng,CHEN Xiong.A visco-hyperelastic constitutive model of EPDM soft PSD of dual-pulse SRM with rate-dependent energy limiter[J].Journal of Solid Rocket Technology,2019,42(03):308-313.
点击复制

双脉冲发动机EDPM软隔层含率相关能量限制器的黏超弹本构模型

参考文献/References:

[1]刘洪超,富婷婷,王春光,等.双脉冲发动机快速建压过程中轴向隔层变形[J].固体火箭技术,2012,35(5):608-612.LIU H C,FU T T,WANG C G,et al.Axial deformation of soft PSD in the speed punching test of double pulse solid rocket motor[J].Journal of Solid Rocket Technology,2012,35(5):608-612.[2]石瑞,王长辉,苌艳楠.双脉冲固体发动机铝膜隔板设计和试验研究[J].固体火箭技术,2013,36(2):190-194.SHI R,WANG C H,CHANG Y N,et al.Design and experimental study on aluminum clapboard of dual-pulse solid motor[J].Journal of Solid Rocket Technology,2013,36(2):190-194.[3]王伟,李江,王春光,等.隔舱式双脉冲发动机金属膜片设计与试验研究[J].推进技术,2013,34(8):1115-1120.WANG W,LI J,WANG C G,et al.Study on metal diaphragm of pulse separation device in dual-pulse solid rocket motor[J].Journal of Propulsion Technology,2013,34(8):1115-1120.[4]李修明,王一白,李海涛,等.内孔隔板脉冲固体火箭发动机隔板传热分析[J].兵器装备工程学报,2017,38(2):57-60.LI X M,WANG Y B,LI H T,et al.Analysis on clapboard heat transfer of inner bore clapboard dualpulse solid rocket motor[J].Journal of Sichuan Ordnance,2017,38(2):57-60.[5]王春光,田维平,陈聪,等.脉冲发动机中软质隔层工作过程研究[J].导弹与航天运载技术,2013(1):11-16.WANG C G,TIAN W P,CHEN C,et al.Investigation on the work process of soft PSD in pulse SRM[J].Missiles and Space Vehicles,2013(1):11-16.[6]付鹏,宋学宇,孙利清,等.脉冲发动机软隔离装置反向打开过程研究[J].固体火箭技术,2017,40(2):146-150.FU P,SONG X Y,SUN L Q,et al.Investigation on the reverse opening process of the soft insulator of double pulse solid rocket motor[J].Journal of Solid Rocket Technology,2017,40(2):146-150.[7]CHENG M,CHEN W.Experimental investigation of the stress-stretch behavior of EPDM rubber with loading rate effects[J].International Journal of Solids & Structures,2003,40(18):4749-4768.[8]CHENG M,CHEN W,SONG B.Phenomenological modeling of the stress-stretch behavior of EPDM rubber with loading-rate and damage effects[J].International Journal of Damage Mechanics,2004,13(4):371-381.[9]POURIAYEVALI H,GUO Y B,SHIM V P W.A constitutive description of elastomer behaviour at high strain rates-A strain-dependent relaxation time approach[J].International Journal of Impact Engineering,2012,47(Supplement C):71-78.[10]张中水,陈雄,周清春,等.EPDM绝热层的粘超弹本构模型[J].固体火箭技术,2015,38(2):273-277.ZHANG Z S,CHEN X,ZHOU Q C,et al.A visco-hyperelastic constitutive model for EPDM insulation[J].Journal of Solid Rocket Technology,2015,38(2):273-277.[11]蒋晶,许进升,陈雄,等.EPDM包覆层材料准静态压缩试验及力学模型研究[J].推进技术,2015,36(8):1268-1273.JIANG J,XU J S,CHEN X,et al.Quasi-static compression experiment and research on mechanical model of EPDM insulation material[J].Journal of Propulsion Technology,2015,36(8):1268-1273.[12]杨晓红,许进升,孙俊丽,等.三元乙丙材料粘超弹本构模型研究[J].兵工学报,2014,35(8):1205-1209.YANG X H,XU J S,SUN J L,et al.Research on visco-hyperelastic constitutive model of EPDM[J].Acta Armamentarii,2014,35(8):1205-1209.[13]Volokh K Y.Nonlinear elasticity for modeling fracture of isotropic brittle solids[J].Transactions-american society of mechanical engineers journal of applied mechanics,2004,71(1):141-142.[14]Volokh K Y.Modeling failure of soft anisotropic materials with application to arteries[J].Journal of the mechanical behavior of biomedical materials,2011,4(8):1582-1594.[15]Volokh K Y.Prediction of arterial failure based on a microstructural bi-layer fiber-matrix model with softening[J].Journal of biomechanics,2008,41(2):447-453. [16]Volokh K Y,Vorp D A.A model of growth and rupture of abdominal aortic aneurysm[J].Journal of biomechanics,2008,41(5):1015-1021.[17]Trapper P,Volokh K Y.Modeling dynamic failure in rubber[J].International Journal of Fracture,2010,162(1-2):245-253.[18]Volokh K Y.On modeling failure of rubber-like materials[J].Mechanics Research Communications,2010,37(8):684-689.[19]Volokh K Y.Review of the energy limiters approach to modeling failure of rubber[J].Rubber Chemistry and Technology,2013,86(3):470-487.[20]Volokh K,Trapper P.Softening hyperviscoelasticity for modeling rate-dependent material failure[J].Journal of Mechanics of Materials and Structures,2008,3(9):1695-1707.[21]Aranda-Iglesias D,Vadillo G,Rodríguez-Martínez J A,et al.Modeling deformation and failure of elastomers at high strain rates[J].Mechanics of Materials,2017,104:85-92.[22]Fatt M S H,Ouyang X.Three-dimensional constitutive equations for styrene butadiene rubber at high strain rates[J].Mechanics of Materials,2008,40(1-2):1-16.[23]Simo J C,Hughes T J R.Computational Inelasticity Springer-Verlag[M].New York,1998:143-149. [24]Trapper P,Volokh K Y.Modeling dynamic failure in rubber[J].International Journal of Fracture,2010,162(1-2):245-253.[25]Khajehsaeid H,Arghavani J,Naghdabadi R.A hyperelastic constitutive model for rubber-like materials[J].European Journal of MechanicsA/Solids,2013,38:144-151.

相似文献/References:

[1]高国新,谭溢波,孙捷,等.Zn(MAA)2和Mg(MAA)2用量对绝热层与金属粘接性能的影响[J].固体火箭技术,2009,(03):344.
[2]陈剑,李江,李强,等.EPDM绝热材料炭化层结构特征及其对烧蚀的影响[J].固体火箭技术,2011,(01):122.
[3]刘洋,李江,杨飒,等.过载条件下EPDM绝热材料烧蚀机理和模型研究(Ⅰ)——烧蚀机理分析[J].固体火箭技术,2011,(02):229.
[4]杨飒,何国强,李江,等.模拟过载条件下EPDM绝热材料烧蚀模型(Ⅱ)——考虑炭层孔隙结构的颗粒侵蚀模型[J].固体火箭技术,2011,(03):349.
[5]张中水,许进升,陈雄,等.EPDM包覆层热解状态下的力学行为及本构模型[J].固体火箭技术,2016,(04):560.
[6]付鹏,宋学宇,孙利清,等.脉冲发动机软隔离装置反向打开过程研究[J].固体火箭技术,2017,40(02):146.[doi:10.7673/j.issn.1006-2793.2017.02.003]

更新日期/Last Update: 2019-07-11
PDF下载 分享