[1]王学仁,王广,强洪夫,等.固体火箭发动机人工脱粘技术研究进展[J].固体火箭技术,2019,42(03):334-339.
 WANG Xueren,WANG Guang,QIANG Hongfu,et al.Research progress on stress release technology of solid rocket motors[J].Journal of Solid Rocket Technology,2019,42(03):334-339.
点击复制

固体火箭发动机人工脱粘技术研究进展

参考文献/References:

[1]史宏斌,朱祖念,张善祁.多种材料人工脱粘应力场分析[J].固体火箭技术, 1995,18(1):24-29.SHI Hongbin,ZHU Zunian,ZHANG Shanqi.Stress fields analysis of stress release boot region with various materials [J].Journal of Solid Rocket Technology,1995,18(1):24-29.[2]朱祖念,张善祁,赵晓晨.发动机人工脱粘层深度选择和前缘形状设计[R].中国航天科技集团公司四院四十一所,1990.ZHU Zunian,ZHANG Shanqi,ZHAO Xiaochen.Depth selection and leading edge shape design of stress release layer for engine[R].The 41st Institute of the Fourth Academy of CASC,1990. [3]阮崇智.大型固体火箭发动机研制的关键技术[J].固体火箭技术,2005,28(1):23-28.RUAN Chongzhi.Critical techniques in development of large-size solid rocket motors[J].Journal of Solid Rocket Technology,2005,28(1):23-28. [4]赵晓晨.发动机人工脱粘有限元分析[R].中国航天科技集团公司四院四十一所,1990.ZHAO Xiaochen.Finite element analysis of stress release layer for SRM[R].The 41st Institute of the Fourth Academy of CASC,1990.[5]徐泽明,邹德荣,毛晓明.人工脱粘层制作工艺[J].航天工艺,2001,8(4):49-50.XU Zeming,ZOU Derong,MAO Xiaoming.Fabrication technology of stress release layer[J].Aerospace technology,2001,8(4):49-50.[6]蒙上阳,唐国金,雷勇军.固体火箭发动机人工脱粘层最佳深度的获取方法[J].广西科学,2004,11(2):106-108.MENG Shangyang,TANG Guojin,LEI Yongjun.A method of obtaining the suitable debonded length of the stress release boot of solid rocket motor[J].Guangxi Sciences,2004,11(2):106-108.[7]李磊,雷勇军,申志彬,等. 温度载荷下伞盘深度与脱粘深度对药柱应变的影响[J].固体火箭技术, 2010,33(3):285-288.LI Lei ,LEI Yongjun ,SHEN Zhibin ,et al.Influence of umbrellar slot depth and debonded depth on st rain of grain under temperature load[J].Journal of Solid Rocket Technology,2010,33(3):285-288.[8]朱焊,田维平.固体火箭发动机前封头人工脱粘层烧蚀研究[J].固体火箭技术,2001,24(1):7-12.ZHU Han,TIAN Weiping.Studies on the ablation of the stress release boot in forward-dome of solid rocket motor[J].Journal of Solid Rocket Technology, 2001,24(1):7-12. [9]Williams M L.The stresses around a fault or crack in dissimilar media[J].Bulletin of the Seismological Society of America.1959,49(2):199-204.[10]Atkinson C.On stress singularities and interfaces in linear elastic fracture mechanics [J].International Journal of Fracture,1977,13(6):807-820.[11]Comninou M.The interface crack [J].Journal of Applied Mechanics,1977,44(4):631-636.[12]Mak A F,Keer L M,Chen S H,et al.A no-slip interface crack[J].Journal of Applied Mechanics,1980,47:347-350.[13]Delale F,Erdogan F.On the mechanical modeling of the interfacial region in bonded halfplanes [J].Journal of Applied Mechanics,1988,55(2):317-324.[14]邸克,杨月诚.功能梯度界面层模型断裂问题研究进展[J].四川兵工学报,2012,33(10):116-119.DI Ke,YANG Yuecheng.Research progress on fracture of functionally gradient interfacial layer model[J].Journal of Sichuan Ordnance, 2012,33(10):116-119.[15]Li Y D,Lee K Y.Mechanical modeling and transient antiplane fracture analysis for the graded interdiffusion regions in a bonded structure[J].Meccanica,2009,44( 4):389-408.[16]吴丰军,彭松,池旭辉.NEPE 推进剂/衬层粘接界面层厚度表征方法研究[J].固体火箭技术,2008,31( 6):650-652.WU Fengjun,PENG Song,CHI Xuhui.Study on charact erization methods of interface thickness of NEPE propellant/liner[J].Journal of Solid Rocket Technology,2008,31(6):650-652.[17]吴丰军,彭松,池旭辉.NEPE 推进剂/衬层粘接界面细观力学性能/结构研究[J].固体火箭技术,2010,33 ( 1):81-85.WU Fengjun,PENG Song,CHI Xuhui.Study on microcosmic mechanics performance/structure of NPPE propellant/liner bonded interface[J].Journal of Solid Rocket Technology,2010,33 ( 1):81-85.[18]邸克,杨月诚.固体推进剂/衬层界面脱粘裂纹的三区域界面层模型[J].推进技术, 2012,33(4):603-608.DI Ke,YANG Yuecheng.Triregion interfacial zone model for solid propellant/liner interfacial debonded crack[J].Journal of Propulsion Technology,2012,33(4):603-608. [19]邸克,杨月诚.固体推进剂/衬层界面裂纹的界面层模型有限元分析[J].固体火箭技术, 2012,35(6):751-755.DI Ke,YANG Yuecheng.Finite element analysis of the interfacial zone model for solid propellant/liner interface crack[J].Journal of Solid Rocket Technology,2012,35(6):751-755.[20]Erdogan F,Sih G C.On the crack extension under plate loading and transverse shear [J].Journal of Basic Engineering,1963,85:519-525.[21]Sih G C.Strain energy density factor applied to mixed mode crack problems[J].International Journal of Fracture,1974,10(3):305-321.[22]Liu C T.Evaluation of damage fields near crack tips in a composite solid propellant[J].Journal of Spacecraft and Rockets,1991,28(1):64-70.[23]Wu S R,Lu Y C,Kuo K K,et al.Combustioninduced crack/debond propagation in a metalized propellant[R].AIAA 92-3506.[24]Lu Y C,Kuo K K,Wu S R.Crack propagation process in a burning APbased composite solid propellant[R].AIAA 93-2168.[25]Eugene C Francis,Harold R Jacobs.Fracture considerations for surveillance programs [J].Journal of Spacecraft and Rockets,1976,13(8):451-455.[26]Huang C Y,Luca Massa,Robert Fiedler,et al.Simulation of convective burning and dynamic fracture in solid propellants [R]. AIAA 2002-4342.[27]何国强,肖育民,陈宏,等.装药燃烧增压过程中脱粘扩展条件实验分析[J].固体火箭技术,1998,21(1):16-19.HE Guoqiang,XIAO Yumin,CHEN Hong,et al.Experiment on the factors affecting the debond propagation in solid rocket motors[J].Journal of Solid Rocket Technology,1998,21(1):16-19.[28]史宏斌.用混合标架法处理药柱尾部人工脱粘滑动边界条件[J].推进技术,1995,10(5):79-81.SHI Hongbin.Treatment of stress release moving boundary conditions VIA mixing coordinate method.[J].Journal of Propulsion Technology,1995,10(5):79-81.[29]史宏斌,侯晓,朱祖念,等.含缺陷药柱人工脱粘层前缘应力分析[J].固体火箭技术,1999,22(3):46-49.SHI Hongbin,HOU Xiao,ZHU Zunian,et al.Stress analysis of flap of imperfect grain in consideration of various materials [J].Journal of Solid Rocket Technology,1999,22-3):46-49.[30]岳健,邓斌,申志彬,等.考虑人工脱粘层接触效应的药柱粘弹性分析[J].固体火箭技术, 2013,36(3):338-352.YUE Jian,DENG Bin,SHEN Zhibin,et al.Viscoelastic analysis of solid motor grain considering contact effect between stress release boots[J].Journal of Solid Rocket Technology,2013,36(3):338-352.[31]徐瑞强,杨茂,郑晓亚.固体装药人工脱粘层前缘界面脱粘分析[J].科学技术与工程, 2011,11(1):76-81.XU Ruiqiang,YANG Mao,ZHENG Xiaoya.Debond analysis for stress release boot region of solid rocket motor grain [J].Science Technology and Engineering, 2011,11(1):76-81.[32]张晓宏,郑晓亚,李宏岩,等.含人工脱粘层固体装药结构应力应变场分析[J].应用力学学报,2012,29(4):426-430.ZHANG Xiaohong,ZHENG Xiaoya,LI Hongyan,et al.Stress and strain analysis for solid rocket motor grains with stress-release boot[J].Chinese Journal of Applied Mechanics,2012,29(4):426-430. [33]孙得川,王贺.固体发动机人工脱粘的二维实验与数值模拟[J].固体火箭技术,2011,34(1):23-27.SUN Dechuan,WANG He.2-D experimental and numerical simulation of SRM stress-relief flap [J].Journal of Solid Rocket Technology,2011,34(1):23-27.[34]孙得川,王贺.发动机点火过程中压强振荡对人工脱粘的冲击分析[J].固体火箭技术,2009,32(4):388-391.SUN Dechuan,WANG He.Analysis on effect of pressure oscillation shock on stress-release boot of SRM during ignition [J].Journal of Solid Rocket Technology,2009,32(4):388-391.[35]杨月诚,傅学金,张永鑫.固体推进剂药柱在内压载荷下的应力应变分析[J].上海航天,2004(4):44-47.YANG Yuecheng,FU Xuejin,ZHANG Yongxin.The structure analysis of some SRM grain[J].Aerospace Shanghai,2004(4):44-47.

相似文献/References:

[1]李娟,李江,王毅林,等.喉栓式变推力发动机性能研究 [J].固体火箭技术,2007,(6):505.
[2]尤军峰,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,(2):173.
[3]陈林泉,毛根旺,张胜勇.高能固体火箭发动机爆炸冲击波毁伤效应研究[J].固体火箭技术,2008,(6):588.
[4]白宏伟,尤军峰,张铎,等.级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析[J].固体火箭技术,2008,(6):595.
[5]陈林泉,毛根旺,陈军涛.采用高低燃温组合装药降低喷管内表面温度和烧蚀研究[J].固体火箭技术,2008,(6):599.
[6]苑博,刘勇琼,尤军峰,等.轴压载荷作用下全复合材料裙与壳体搭接区的结构分析[J].固体火箭技术,2008,(6):629.
[7]樊建龙,唐金兰,李进贤,等.固体火箭发动机点火瞬间火焰传播模型比较研究[J].固体火箭技术,2008,(6):575.
[8]窦毅芳,刘飞,张为华.基于张量积函数的固体火箭发动机性能散布分析[J].固体火箭技术,2008,(6):579.
[9]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[10]邹汝平,李晓斌,张为华.固体发动机内弹道计算不确定性研究[J].固体火箭技术,2009,(01):33.
[11]孙得川,王贺.发动机点火过程中压强振荡对人工脱粘的冲击分析[J].固体火箭技术,2009,(04):388.
[12]孙得川,王贺.固体发动机人工脱粘的二维实验与数值模拟[J].固体火箭技术,2011,(01):23.

更新日期/Last Update: 2019-07-11
PDF下载 分享