[1]王虎干,职世君,曹军伟,等.固体推进剂药浆流平性对发动机装药结构完整性的影响[J].固体火箭技术,2019,42(03):345-350.[doi:10.7673/j.issn.1006-2793.2019.03.013]
 WANG Hugan,ZHI Shijun,CAO Junwei,et al.Influence of propellants slurry leveling properties on structural integrity of the SRM grain[J].Journal of Solid Rocket Technology,2019,42(03):345-350.[doi:10.7673/j.issn.1006-2793.2019.03.013]
点击复制

固体推进剂药浆流平性对发动机装药结构完整性的影响

参考文献/References:

[1]唐汉祥,刘秀兰,吴倩.推进剂料浆流平性研究[J].推进技术,2000,21(3):79-82.TANG Hanxiang,LIU Xiulan,WU Qian.Leveling properties of the composite solid propellants slurry[J].Journal of Propulsion Technology,2000,21(3):79-82.[2]唐汉祥.AP级配和铝粉对HTPB推进剂料浆流变性的影响[J].固体火箭技术,1998,21(1):26-29.TANG Hanxiang.Effect of multimodal AP and Al on rheological behaviour of HTPB propellant slurry[J].Journal of Solid Rocket Technology,1998,21(1):26-29.[3]王晓飞,李勇宏,胥会祥,等.含微米级AP的HTPB推进剂工艺性能和力学性能[J].火炸药学报,2015,38(1):56-58.WANG Xiaofei,LI Yonghong,XU Huixiang et al.Process properties and mechanical properties of HTPB propellant with micron scale AP[J].Chinese Journal of Explosives & Propellants,2015,38(1):56-58.[4]唐汉祥.铝粉/HTPB悬浮液的流变性特性[J].固体火箭技术,1996,19(3):23-27.TANG Hanxiang.Rheological behaviour of HTPB suspension filled with aluminum powder[J].Journal of Solid Rocket Technology,1996,19(3):23-27.[5]Jawalkar S N,Mehilal,Radha K et al.Studies on the effect of plasticiser and addition of toluene diisocyanate at different temperatures in composite propellant formulations[J].Journal of Hazardous Materials,2009,164(2-3):549-554.[6]Rodic V, Petric M.The effect of additives on solid rocket propellant characteristics[J].Scientific Technical Review,2004,3(4):9-14.[7]鲁国林.工艺温度对丁羟推进剂力学性能的影响[J].固体火箭技术,1999,22(3):34-36.LU Guolin.Effect of process temperature on mechanical properties of HTPB propellant[J].Journal of Solid Rocket Technology,1999,22(3):34-36.[8]John Wiley.Rocket propulsion element[M].Hoboken,New Jersey,2010.[9]赵永翔,赵连起.复合固体推进剂生产中减少气孔的工艺研究[J].火炸药学报,1999(2):37-38.ZHAO Yongxiang,ZHAO Lianqi.Process study on reducing pore in production of solid composite propellant[J].Chinese Journal of Explosives & Propellants,1999(2):37-38.[10]Ribereau D,Le P Breton,Ballereau S.Casting process effect on composite solid propellant burning rate[R].AIAA 2001-3946. [11]许进升.复合推进剂粘弹性本构模型实验及数值仿真研究[D].南京:南京理工大学,2013.XU Jinsheng.Experimental and numerical research on thermo-viscoelastic constitutive model of composite propellant[D].Nanjing:Nanjing University of Science & Technology,2013.[12]张亮,邢国强.某发动机装药结构完整性分析[J].航空兵器,2012(2):29-32.ZHANG Liang,XING Guoqiang.The analysis for grain structural integrity of a certain solid rocket motor[J].Aero Weaponry,2012(2):29-32.[13]李记威,房雷,李晔鑫,等.含气孔装药固体火箭发动机结构完整性分析[J].航空兵器,2015(4):24-27.LI Jiwei,FANG Lei,LI Yexin et al.Structure integreity analysis of solid rocket motor with cavities[J].Aero Weaponry,2015(4):24-27.[14]职世君,孙冰,张建伟.考虑泊松比的固体发动机装药贮存寿命预估[J].固体火箭技术,2011,34(5):593-596.ZHI Shijun,SUN Bing,ZHANG Jianwei.Storage life prediction for solid rocket motor grain in consideration of Poisson’s ratio[J].Journal of Solid Rocket Technology,2011,34(5):593-596.[15]赵伯华,沈月萍.火箭装药体积形变力学特性的研究[J].推进技术,1994,2(2):58-61.ZHAO Bohua,SHEN Yueping.A study on volume deformation mechanical properties of rocket grain[J].Journal of Propulsion Technology,1994,2(2):58-61.

相似文献/References:

[1]田四朋,唐国金,雷勇军,等.固体火箭发动机随机药柱结构分析参数的灵敏度研究[J].固体火箭技术,2008,(1):28.
[2]封锋,陈军,郑亚.基于能量特性配方设计专家系统的开发与实现[J].固体火箭技术,2009,(02):206.
[3]张伟,樊学忠,张腊莹,等.NEPE推进剂低温瞬态的粘弹特性[J].固体火箭技术,2009,(03):298.
[4]阳建红,刘朝丰,邓凯.固体推进剂的变角剪切力学试验研究[J].固体火箭技术,2009,(04):436.
[5]闫大庆,徐丹丹,师经国.固体推进剂粘合剂HTPE研究及其分子设计思想概述[J].固体火箭技术,2009,(06):644.
[6]李苗苗,汪越,郭效德,等.RDX/AMMO-BAMO推进剂燃烧模型[J].固体火箭技术,2009,(06):654.
[7]陈煜,刘云飞,夏吉东,等.键合剂对NEPE推进剂破坏趋势影响的实验定量研究[J].固体火箭技术,2010,(03):299.
[8]刘中兵,汪亮,胡春波.HTPB推进剂高压燃烧特性研究[J].固体火箭技术,2010,(03):302.
[9]段毅,刘宇,覃粒子,等.考虑两相表面反应的二硝酰胺铵点火研究[J].固体火箭技术,2010,(03):311.
[10]刘晶如,罗运军.固体推进剂用铝基复合材料的制备及性能[J].固体火箭技术,2010,(05):545.

更新日期/Last Update: 2019-07-11
PDF下载 分享