[1]程吉明,李进贤,冯喜平,等.挂载飞行温度边界下固体发动机药柱结构响应分析[J].固体火箭技术,2019,42(03):351-355.[doi:10.7673/j.issn.1006-2793.2019.03.014]
 CHENG Jiming,LI Jinxian,FENG Xiping,et al.Structural analysis of SRM grains under mounted flight temperature boundary conditions[J].Journal of Solid Rocket Technology,2019,42(03):351-355.[doi:10.7673/j.issn.1006-2793.2019.03.014]
点击复制

挂载飞行温度边界下固体发动机药柱结构响应分析

参考文献/References:

[1]赖建伟,常新龙,龙兵,等.HTPB 推进剂的低温力学性能[J].火炸药学报,2012,35(3):80-83.LAI Jianwei,CHANG Xinlong,LONG Bin,et al.Low temperature mechanical properties of HTPB propellant[J].Chinese Journal of Explosives and Propellants,2012,35(3):80-83. [2]Chen X,Lai J,Chang X L,et al.Compressive mechanical properties of HTPB propellant at low temperatures and high strain rates[J].Results in Physics,2017(7):4079-4084.[3]王哲君,强洪夫,王广,等.低温高应变率条件下HTPB 推进剂拉伸力学性能研究[J].推进技术,2015,36(9):1426-1432.WANG Zhejun,QIAN Hongfu,WANG Guang,et al.Tensile mechanical properties of HTPB propellant at low temperature and high strain rate[J].Journal of Propulsion Technology,2015,36(9):1426-1432.[4]王玉峰,张勇,曲凯,等.HTPB 推进剂药柱在变温环境下的累积损伤分析[J].弹箭与制导学报,2011,30(6):136-139.WANG Yufeng,ZHANG Yong,QU Kai,et al.Analysis of cumulative damage of HTPB propellant grain under temperature changing condition[J].Journal of Projectiles,Rockets,Missiles and Guidance,2011,30(6):136-139.[5]邓斌,杨东,段静波,等.温度载荷下的药柱累积损伤分析[J].推进技术,2013,34(2):280-284.DENG Bin,YANG Dong,DUAN Jingbo,et al.Cumulative damage analysis of solid rocket motor grain under temperature loading[J].Journal of Propulsion Technology,2013,34(2):280-284.[6]Duncan E J S,Margetson J.A nonlinear viscoelastic theory for solid rocket propellants based on a cumulative damage approach[J].Propellants Explosives Pyrotechnics,1998,23(2):94-104.[7]Chyuan S W.A study of loading history effect for thermoviscoelastic solid propellant grains[J].Computers and Structures,2000,77(6):735-745.[8]Kunz R.Continuum damage mechanics modeling of solid propellant[R].AIAA 2008-4973.[9]孟红磊,赵秀超,鞠玉涛,等.基于累积损伤的双基推进剂强度准则及实验[J].推进技术,2011,32(1):109-112.MENG Honglei,ZHAO Xiuchao,JU Yutao,et al.Strength criterion based on accumulative damage for double-base propellant and experiment[J].Journal of Propulsion Technology,2011,32(1):109-112. [10]邢耀国,董可海,沈伟,等.固体火箭发动机使用工程[M].北京:国防工业出版社,2010.XING Yaoguo,DONG Kehai,SHEN Wei,et al.Application engineering of solid rocket motor[M].Beijing:National Defense Industry Press,2010.[11]杨世铭,陶文铨.传热学[M].北京:高等教育出版社,2006.YANG Shiming TAO Wenquan.Heat transfer[M].Beijing:Higher Education Press,2006.[12]杨炳尉.标准大气参数的公式表示[J].宇航学报,1983,4(1):86-89.YANG Bingwei.Formulization of standard atmospheric parameters[J].Journal of Astronautics,1983,4(1):86-89. [13]李延伟.高空无人机载光学遥感器热控技术研究[D].中国科学院大学,2013.LI Yanwei.Research on thermal control technology of altitude optical sensor mounted on unmanned aerial vehicle[D].Beijing:Chinese Academy of Science,2013.[14]]U S Standard Atmosphere,1976[R].National Oceanic and Atmospheric Administration; National Aeronautics and Space Administration; Untied States Air Force,Washington,D.C.October 1976.

相似文献/References:

[1]李恩奇,雷勇军,袁端才,等.某固体火箭发动机药柱的动力学分析 [J].固体火箭技术,2007,(6):486.
[2]李迎春,何国强,刘佩进,等.粒子冲刷对丁羟推进剂燃烧性能影响试验研究 [J].固体火箭技术,2007,(6):552.
[3]段红珍,蔺向阳,徐磊,等.纳米Co粉在NC基高分子体系中的分散性[J].固体火箭技术,2007,(4):335.
[4]宋小兰,李凤生,张景林,等.粒度和形貌及粒度分布对RDX安全和热分解性能的影响[J].固体火箭技术,2008,(2):168.
[5]朱敏,卢洪义,肖志斌,等.固体发动机CT图像的一种自动分割方法[J].固体火箭技术,2008,(2):201.
[6]申志彬,唐国金,雷勇军,等.基于Patran二次开发的星形药柱结构分析与设计[J].固体火箭技术,2009,(02):175.
[7]王永杰,鲁建英,陈林泉,等.固体火箭发动机撞击靶板安全性数值分析[J].固体火箭技术,2009,(03):274.
[8]宋小兰,李凤生,张景林,等.纳米AP/Fe2O3复合氧化剂的制备及其机械感度和热分解特性[J].固体火箭技术,2009,(03):306.
[9]菅晓霞,肖乐勤,黄求安,等.组分迁移特性表征方法的探索[J].固体火箭技术,2009,(03):314.
[10]曹琪,李进贤,唐金兰,等.固体发动机点火燃气流动与药柱变形耦合过程数值模拟[J].固体火箭技术,2010,(02):156.

更新日期/Last Update: 2019-07-11
PDF下载 分享