[1]王佳奇,贺绍飞,申志彬,等.低温点火条件下药柱结构完整性分析与试验[J].固体火箭技术,2019,42(03):356-360.[doi:10.7673/j.issn.1006-2793.2019.03.015]
 WANG Jiaqi,HE Shaofei,SHEN Zhibin,et al.Analysis and experiment on grain structural integrity under low temperature ignition[J].Journal of Solid Rocket Technology,2019,42(03):356-360.[doi:10.7673/j.issn.1006-2793.2019.03.015]
点击复制

低温点火条件下药柱结构完整性分析与试验

参考文献/References:

[1]陈汝训.固体火箭发动机设计与研究[M].北京:宇航出版社,1991.CHEN Ruxun.Design and research of solid rocket motor[M].Beijing:Aerospace Publishing House,1991.[2]唐国金,申志彬,宋先村,等.固体火箭发动机冷增压试验系统的设计与应用[J].固体火箭技术,2011,34(4):423-425.TANG Guojin,SHEN Zhibin,SONG Xiancun,et al.Design and application of cold pressurization testing system for solid rocket motor[J].Journal of Solid Rocket Technology,2011,34(4):423-425.[3]刘中兵,张兵,周艳青.固体发动机低温点火适应性模拟试验技术[J].固体火箭技术,2015,38(2):203-207.LIU Zhongbing,ZHANG Bing,ZHOU Yanqing.Simulation experiment technology for low temperature ignition adaptability of solid rocket motor[J].Journal of Solid Rocket Technology,2015,38(2):203-207.[4]邓康清,张路,庞爱民,等.自由装填式固体火箭发动机药柱低温点火结构完整性分析[J].固体火箭技术,2018,41(4):428-434.DENG Kangqing,ZHANG Lu,PANG Aimin,et al.Analysis on structural integrity of a free loading solid propellant grains under ignition loading at low temperature[J].Journal of Solid Rocket Technology,2018,41(4):428-434.[5]Chyuan S W.Dynamic analysis of solid propellant grains subjected to ignition pressurization loading[J].Journal of Sound and Vibration,2003,268(3):465-483.[6]Chyuan S W.Nonlinear thermoviscoelastic analysis of solid propellant grains subjected to temperature loading[J].Finite Elements in Analysis and Design,2002,38(7):613-630. [7]申志彬,姜人伟,职世君.伞盘结构对大长径比发动机药柱结构完整性的影响[J].国防科技大学学报,2017,39(1):148-152.SHEN Zhibin,JIANG Renwei,ZHI Shijun.Effects of umbrella slot on the structure integrity of solid rocket motor grain with large aspect ratio[J].Journal of National University of Defense Technology,2017,39(1):148-152.[8]刘梅,高波,董新刚,等.固体发动机药柱完整性失效的判据[J].固体火箭技术,2018,41(4):424-427.LIU Mei,GAO Bo,DONG Xingiang,et al.Failure criterion of solid motors at ignition pressurization loading[J].Journal of Solid Rocket Technology,2018,41(4):424-427.[9]宋仕雄,史宏斌,刘中兵,等.低温状态点火瞬间固体发动机药柱结构响应分析[J].固体火箭技术,2018,41(3):278-283.SONG Shixiong,SHI Hongbin,LIU Zhongbing,et al.Structural analysis of solid rocket motor grain at ignition transient under low temperature[J].Journal of Solid Rocket Technology,2018,41(3):278-283.[10]刘中兵,周艳青,张兵.固体发动机低温点火条件下药柱结构完整性分析[J].固体火箭技术,2015,38(3):351-354.LIU Zhongbing,ZHOU Yanqing,ZHANG Bing,Structural integrity analysis on grains of solid rocket motor at low temperature ignition[J].Journal of Solid Rocket Technology,2015,38(3):351-354.

相似文献/References:

[1]顾志旭,郑坚,彭威,等.应力释放罩对固体发动机药柱结构完整性的影响[J].固体火箭技术,2014,(01):57.[doi:10.7673/j.issn.1006-2793.2014.01.011]
[2]刘中兵,张兵,周艳青.固体发动机低温点火适应性模拟试验技术[J].固体火箭技术,2015,(02):203.
[3]刘中兵,周艳青,张兵.固体发动机低温点火条件下药柱结构完整性分析[J].固体火箭技术,2015,(03):351.
[4]宋仕雄,史宏斌,刘中兵,等.低温状态点火瞬间固体发动机药柱结构响应分析[J].固体火箭技术,2018,41(03):278.[doi:10.7673/j.issn.1006-2793.2018.03.002]
 SONG Shixiong,SHI Hongbin,LIU Zhongbing,et al. Structural analysis of solid rocket motor grain at ignition transient under low temperature[J].Journal of Solid Rocket Technology,2018,41(03):278.[doi:10.7673/j.issn.1006-2793.2018.03.002]

更新日期/Last Update: 2019-07-11
PDF下载 分享