[1]刘磊,李高春,李金飞,等.基于实测数据的固体火箭发动机粘接界面振动损伤分析[J].固体火箭技术,2019,42(03):389-395.[doi:10.7673/j.issn.1006-2793.2019.03.021]
 LIU Lei,LI Gaochun,LI Jinfei,et al.Vibration damage analysis of the bonded interface of shipborne solid rocket motor based on measured data[J].Journal of Solid Rocket Technology,2019,42(03):389-395.[doi:10.7673/j.issn.1006-2793.2019.03.021]
点击复制

基于实测数据的固体火箭发动机粘接界面振动损伤分析

参考文献/References:

[1]张波,董可海,邢耀国,等.舰载值班对立式贮存发动机粘接界面损伤研究[J].推进技术,2017,38(8):1863-1869.ZHANG Bo,DONG Kehai,XING Yaoguo,et al.Research on bonding interface damage of vertical storage motor by shipboard[J].Journal of Propulsion Technology,2017,38(8):1863-1869.[2]曲凯,张杰,张旭东.舰船运动对固体火箭发动机粘接界面疲劳损伤研究[J].兵工学报,2012,33(8):986-990.QU Kai,ZHANG Jie,ZHANG Xudong.Research on effects of ship motion on interface fatigue damage of solid rocket motor[J].Acta Armamentarii,2012,33(8):986-990.[3]XING Yaoguo,QU Kai,XU Junsong,et al.Life prediction of shipborne solid rocket motor under the ship swing motion[J].Journal of Propulsion Technology,2011,32(1):32-35.[4]Y1 lmaz O,Kuran B,zgen G O.Reliability assessment of solid-propellant rocket motors under storage and transportation loads[J].Journal of Spacecraft and Rockets,2017,54(6): 1356-1366.[5]李金飞.舰载导弹固体发动机药柱老化与损伤研究[D].烟台: 海军航空工程学院,2016.LI Jinfei.Research on aging and damage of solid motor grain of shipboard missile[D].Yantai: Naval Aeronautical and Astronautical University,2016.[6]曲凯,张旭东.海洋环境下舰载固体火箭发动机运动模型[J].系统仿真学报,2013,25(1):164-169.QU Kai,ZHANG Xudong.Model of shipborne solid rocket motor motion in marine environment[J].Journal of System Simulation,2013,25(1):164-169.[7]王济.MATLAB在振动信号处理中的应用[M].知识产权出版社,2006.WANG Ji.Application of MATLAB in vibration signal processing[M].Intellectual Property Publishing House,2006.[8]孙苗钟.基于MATLAB的振动信号平滑处理方法[J].电子测量技术,2007,30(6):55-57.SUN Miaozhong.Smooth processing methods of vibration signal based on MATLAB[J].Electronic Measurement Technology,2007,30(6):55-57.[9]张春龙.固体发动机粘接界面受载状态监检测技术与方法研究[D].烟台: 海军航空工程学院,2015.ZHANG Chunlong.Research on monitoring technology and method of load state monitoring of solid rocket motor bonding interface[D].Yantai: Naval Aeronautical and Astronautical University,2015.[10]袁军,任萍,何高让.大型固体发动机燃烧室立式贮存研究[J].固体火箭技术,2014,37(6):809-813.YUAN Jun,REN Ping,HE Gaorang.Research on vertical storage of large-scale SRM chamber[J].Journal of Solid Rocket Technology,2014,37(6):809-813.[11]宗路航,杜聪,卢山,等.固体火箭发动机药柱加压固化仿真[J].固体火箭技术,2015,38(5):653-656.ZONG Luhang,DU Cong,LU Shan,et al.Simulation on pressure cure of solid rocket motor grain[J].Journal of Solid Rocket Technology,2015,38(5):653-656.[12]王为国,寿比南,杨国义.JB4732—1995《钢制压力容器—分析设计标准》中内压回转壳体厚度计算公式的简单修正[J].化工设备与管道,2006,43(1):1-3.WANG Weiguo,SHOU Binan,YANG Guoyi.Modification of equations in JB4732—1995 for rounded shell subjected to internal pressure[J].Process Equipment & Piping,2006,43(1):1-3.[13]陆明万,寿比南,杨国义.疲劳分析中变幅载荷的循环计数方法[J].压力容器,2012,29(11):25-29.LU Mingwan,SHOU Bi nan,YANG Guoyi.Cycle counting methods of variable amplitude loading for fatigue analysis[J].Pressure Vessel Technology,2012,29(11):25-29.

相似文献/References:

[1]李娟,李江,王毅林,等.喉栓式变推力发动机性能研究 [J].固体火箭技术,2007,(6):505.
[2]尤军峰,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,(2):173.
[3]陈林泉,毛根旺,张胜勇.高能固体火箭发动机爆炸冲击波毁伤效应研究[J].固体火箭技术,2008,(6):588.
[4]白宏伟,尤军峰,张铎,等.级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析[J].固体火箭技术,2008,(6):595.
[5]陈林泉,毛根旺,陈军涛.采用高低燃温组合装药降低喷管内表面温度和烧蚀研究[J].固体火箭技术,2008,(6):599.
[6]苑博,刘勇琼,尤军峰,等.轴压载荷作用下全复合材料裙与壳体搭接区的结构分析[J].固体火箭技术,2008,(6):629.
[7]樊建龙,唐金兰,李进贤,等.固体火箭发动机点火瞬间火焰传播模型比较研究[J].固体火箭技术,2008,(6):575.
[8]窦毅芳,刘飞,张为华.基于张量积函数的固体火箭发动机性能散布分析[J].固体火箭技术,2008,(6):579.
[9]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[10]邹汝平,李晓斌,张为华.固体发动机内弹道计算不确定性研究[J].固体火箭技术,2009,(01):33.

更新日期/Last Update: 2019-07-11
PDF下载 分享