[1]张峰涛,彭松,沙宝林,等.固体推进剂装药低温应力等效加速试验方法研究[J].固体火箭技术,2019,42(03):409-413.[doi:10.7673/j.issn.1006-2793.2019.03.024]
 ZHANG Fengtao,PENG Song,SHA Baolin,et al.Study on equivalent accelerated test method of low temperature stress for solid propellant charge[J].Journal of Solid Rocket Technology,2019,42(03):409-413.[doi:10.7673/j.issn.1006-2793.2019.03.024]
点击复制

固体推进剂装药低温应力等效加速试验方法研究

参考文献/References:

[1]沈怀荣.温度相依固体推进剂蠕变损伤模型[J].固体火箭技术,1992(4):39-43.SHEN Huairong.Creep damage model of solid propellant with temperature phase [J].Journal of Solid Rocket Technology,1992(4):39-43.[2]杨挺青,罗文波,徐平,等.黏弹性理论与应用[M].北京:科学出版社,2004.[3]韩龙,陈雄,赵亚楠,等.基于累积损伤模型的NEPE推进剂温度及率相关破坏准则研究[J].推进技术,2015,36(12):1895-1900.HAN Long,CHEN Xiong,ZHAO Yanan,et al.Rate and temperature dependent strength criterion based on accumulative damage for NEPE propellant [J].Journal of Propulsion Technology,2015,36(12):1895-1900.[4]曹付齐,李小换,刘志成,等.结构试验器固体推进剂装药低温加速老化试验研究[J].含能材料,2015,23(7):648-652.CAO Fuqi,LI Xiaohuan,LIU Zhicheng,et al.Low temperature accelerated aging study of propellant charge in structural tester[J].Chinese Journal of Energetic Materials,2015,23(7):648-652.[5]Ken L Laheru.Development of a generalized failure criterion for viscoelastic materials [R].AIAA 90-1970.[6]张昊,彭松,庞爱民.固体推进剂应力和应变与使用寿命关系[J].推进技术,2006,27(4):372-375.ZHANG Hao,PENG Song,PANG Aimin.Relationship between stress-strain and service life of solid propellant [J].Journal of Propulsion Technology,2006,27(4):372-375.[7]张昊,彭松,庞爱民,等.NEPE推进剂力学性能与化学安定性关联老化行为及机理[J].推进技术,2007,28(3): 327-332.ZHANG Hao,PENG Song,PANG Aimin,et al.Coupling aging behaviors and mechanism between mechanical properties and chemical stability of NEPE propellant[J].Journal of Propulsion Technology,2007,28(3): 327-332.[8]杨根,彭松,池旭辉,等.NEPE推进剂“两段式老化的动力学研究[J].固体火箭技术,2009,32(6):650-653.YANG Gen,PENG Song,CHI Xuhui,et al.Investigation on NEPE propellants “two-stage-style”ageing kinetics [J].Journal of Solid Rocket Technology,2009,32(6):650-653.

相似文献/References:

[1]田四朋,唐国金,雷勇军,等.固体火箭发动机随机药柱结构分析参数的灵敏度研究[J].固体火箭技术,2008,(1):28.
[2]封锋,陈军,郑亚.基于能量特性配方设计专家系统的开发与实现[J].固体火箭技术,2009,(02):206.
[3]张伟,樊学忠,张腊莹,等.NEPE推进剂低温瞬态的粘弹特性[J].固体火箭技术,2009,(03):298.
[4]阳建红,刘朝丰,邓凯.固体推进剂的变角剪切力学试验研究[J].固体火箭技术,2009,(04):436.
[5]闫大庆,徐丹丹,师经国.固体推进剂粘合剂HTPE研究及其分子设计思想概述[J].固体火箭技术,2009,(06):644.
[6]李苗苗,汪越,郭效德,等.RDX/AMMO-BAMO推进剂燃烧模型[J].固体火箭技术,2009,(06):654.
[7]陈煜,刘云飞,夏吉东,等.键合剂对NEPE推进剂破坏趋势影响的实验定量研究[J].固体火箭技术,2010,(03):299.
[8]刘中兵,汪亮,胡春波.HTPB推进剂高压燃烧特性研究[J].固体火箭技术,2010,(03):302.
[9]段毅,刘宇,覃粒子,等.考虑两相表面反应的二硝酰胺铵点火研究[J].固体火箭技术,2010,(03):311.
[10]刘晶如,罗运军.固体推进剂用铝基复合材料的制备及性能[J].固体火箭技术,2010,(05):545.

更新日期/Last Update: 2019-07-11
PDF下载 分享