[1]雷宁,闫心怡.国外大型固体火箭发动机立式贮存老化研究状况[J].固体火箭技术,2019,42(03):419-426.[doi:10.7673/j.issn.1006-2793.2019.03.026]
 LEI Ning,YAN Xinyi.Research on aging of large solid rocket motor under vertical storage condition[J].Journal of Solid Rocket Technology,2019,42(03):419-426.[doi:10.7673/j.issn.1006-2793.2019.03.026]
点击复制

国外大型固体火箭发动机立式贮存老化研究状况

参考文献/References:

[1]J Edmund Fitzgerald ,William L Hufferd.Handbook for the engineering structural analysis of solid propellants[R].AD887478.[2]Eugene L Larson.A review of the Minuteman propulsion surveillance program for assessing rocket motor service life[R].AD467048.[3]Hubner C,Geibler E,Elsner P.The Importance of micromechanical phenomena in energetic material [J].Propellants,Explosives,Pyrotechnics,1999,24(3):119-125.[4]Kelley F N,Trout J L.Elements of solid rocket service life prediction[R].AIAA 72-1085.[5]John L Myers,Edwin L Moon,Lemuel R Allen.Bibliography of solid rocket component aging[R].AD372032.[6]Veit P V,Landuk L G,Simpson J V,et al.Evolution of an aging program Minuteman stage II solid rocket motor[R].ADA240864. [7]Eugene L Larson,The minuteman propulsion surveillance program for assessing rocket motor service life[R].AD467048. [8]Koford R E.Minuteman stage Ⅲ materials and components surveillance program[R].ADA015429.[9]Dennis F Malik.Storage reliability of missile materiel program,solid Propellant rocket motor[R].ADA026105.[10]John A Thomson.Minuteman stage I motor reliability improvement program surveillance[R].ADA030640.[11]Eugene F Lund.Minuteman long range service life analysis overview[R].AIAA 76-716.[12]Bennett S J.LRSLA Minuteman Ⅲ stage Ⅰ material characterization program and results[R].AIAA 76-718.[13]Anderson G P.Minuteman stage Ⅰ overtest results[R].AIAA 76-719. [14]Ralph Davis.Minuteman III-surveillance semiannual report[R].ADA164840.[15]Aerojet Strategic Propulsion Company.Aging and surveillance program Minuteman Ⅱ/Ⅲ stage II program progress[R].ADA168269.[16]Veit P W.Evolution of an aging program Minuteman stage Ⅱ solid rocket motor[R].AIAA 88-3328.[17]Gregory Ruderman.Health management issues and strategy for air force missiles[R].ADA446283.[18]Greg Ruderman,Eric Weber,Andrew Sincock.Health management and service life for air force missiles[R].ADA554598.[19]James Fillerup,Robert Pritchard.Service life prediction technology program[R].ADA397950.[20]Giuseppe S Tussiwand,Victor Saouma,Robert Terzenbach.Fracture mechanics of composite solid rocket propellant grains[J].Journal of Propulsion and Power,2009,25(1):60-73.[21]Williams M L.The structural analysis of viscoelastic materials[R].AIAA 63-284.[22]Aravas N,Xu F,Sofronis P,et al.Constitutive response and damage in solid propellants[R].AIAA 2005-4348.[23]Namazifard A,Hjelmstad K,Sofronis P,et al.Simulations of propellant slumping in the Titan IV SRMU using constitutive models with damage evolution[R].AIAA 2005-3994.[24]Fiedler R,Namazifard A,Campbell M,et al.Detailed simulations of propellant slumping in the TitanIV SRMU PQM1[R].AIAA 2006-4592.[25]Sami Kilic,Arif Karabeyoglu,Jose Stevens,et al.Modeling the slump characteristics of the hydrocarbonbased hybrid rocket fuels[R].AIAA 2003-4461.

相似文献/References:

[1]李娟,李江,王毅林,等.喉栓式变推力发动机性能研究 [J].固体火箭技术,2007,(6):505.
[2]田四朋,唐国金,雷勇军,等.固体火箭发动机随机药柱结构分析参数的灵敏度研究[J].固体火箭技术,2008,(1):28.
[3]尤军峰,陈汝训.固体火箭发动机壳体后封头屈曲分析[J].固体火箭技术,2008,(2):173.
[4]陈林泉,毛根旺,张胜勇.高能固体火箭发动机爆炸冲击波毁伤效应研究[J].固体火箭技术,2008,(6):588.
[5]白宏伟,尤军峰,张铎,等.级间热分离条件下带有延伸喷管的固体火箭发动机尾部流场分析[J].固体火箭技术,2008,(6):595.
[6]陈林泉,毛根旺,陈军涛.采用高低燃温组合装药降低喷管内表面温度和烧蚀研究[J].固体火箭技术,2008,(6):599.
[7]苑博,刘勇琼,尤军峰,等.轴压载荷作用下全复合材料裙与壳体搭接区的结构分析[J].固体火箭技术,2008,(6):629.
[8]樊建龙,唐金兰,李进贤,等.固体火箭发动机点火瞬间火焰传播模型比较研究[J].固体火箭技术,2008,(6):575.
[9]窦毅芳,刘飞,张为华.基于张量积函数的固体火箭发动机性能散布分析[J].固体火箭技术,2008,(6):579.
[10]甘晓松,贾有军,鲁传敬,等.水下燃气射流流场数值研究[J].固体火箭技术,2009,(01):23.
[11]封锋,陈军,郑亚.基于能量特性配方设计专家系统的开发与实现[J].固体火箭技术,2009,(02):206.
[12]刘中兵,汪亮,胡春波.HTPB推进剂高压燃烧特性研究[J].固体火箭技术,2010,(03):302.
[13]徐朝启,何国强,刘佩进,等.固体推进剂燃烧温度的双波长测试方法[J].固体火箭技术,2010,(05):594.

更新日期/Last Update: 2019-07-11
PDF下载 分享