[1]李军强,申依欣,刘春,等.固体推进剂装药枪击试验数值模拟与试验[J].固体火箭技术,2019,42(04):451-455.
 LI Junqiang,SHEN Yixin,LIU Chun,et al.Numerical simulation and experiment on bullet impact characteristics of a solid propellant charge[J].Journal of Solid Rocket Technology,2019,42(04):451-455.
点击复制

固体推进剂装药枪击试验数值模拟与试验

参考文献/References:

[1]Ben-dor G,Dubinski A,Elperin T.Ballistic impact:recent advances in analytical modeling of plate penetration dynamics[J].Applied Mechanics Reviews,2005,58(6):355-371. [2]Zavattieri P D,Raghuram P V,Espinosa H D.A computational model of ceramic microstructures subjected to multi-axial dynamic loading[J].Journal of the Mechanics and Physics of Solids,2001,49(1):27-68.[3]Simha C H M,Bless S J,Bedford A.Computational modeling of the penetration response of a high-purity ceramic[J].International Journal of Impact Engineering,2002,27(1):65-86.[4]Lim C T,Shim V P W,Ng Y H.Finite-element modeling of the ballistic impact of fabric armor[J].International Journal of Impact Engineering,2003,28(1):13-31.[5]Grujicic M,Pandurangan B,Zhao C L,et al.Hypervelocity impact resistance of reinforced carbon-carbon/ carbon-foam thermal protection systems[J].Applied Surface Science,2006,252:5035-5050.[6]Grujicic M,Pandurangan B,Zecevic U,et al.Ballistic performance of alumina/S2 glass fiber-reinforced polymer-matrix composite hybrid lightweight armor against armor piercing (AP) and non-AP projectiles[J].Multidiscipline Model in Materials and Structures,2007,3:287-312.[7]Iannucci L.Progressive failure modelling of woven carbon composite under impact[J].International Journal of Impact Engineering,2006,32(6):1013-1043.[8]Zaera R,Sánchez-Sáez S.Modeling of the adhesive layer in mixed ceramic/metal armours subjected to impact[J].Composites:Part A,2000,31:823-833.[9]Park H,Kim H.Damage resistance of single lap adhesive composite joints by transverse impact[J].International Journal of Impact Engineering,2010,37(2):177-184. [10]Kim H,Keune J N.Compressive strength of ice and impact strain rates[J].Journal of Materials Science,2007,42:2802-2806.[11]Shazly M,Prakash V,Lerch B.High strain-rate behavior of ice under uniaxial compression[J].International Journal of Solids and Structures,2009,46:1499-1515.[12]庄建华,毛佳,张为华,等.固体火箭发动机枪击过程数值模拟[J].固体火箭技术,2009,32(4):422-426.[JP3]ZHUANG Jianhua,MAO Jia,ZHANG Weihua,et al.Numerical simulation of the gunshot process of solid rocket motor[J].Journal of Solid Rocket Technology,2009,32(4):422-426.[13]李小柱,裴养卫.固体火箭发动机枪击低易损性试验研究[J].弹箭与制导学报,2000,20(2):39-42.LI Xiaozhu,PEI Yangwei.Low vulnerability experiment study of solid rocket engine under popping condition[J].Journal of Projectiles,Rockets,Missiles and Guidance,2000,20(2):39-42.[14]代晓淦,申春迎,吕子剑,等.枪击试验中不同尺寸PBX-2炸药响应规律研究[J].含能材料,2008,16(4):432-435.DAI Xiaogan,SHEN Chunying,LV Zijian,et al.Reaction properties for different size PBX-2 explosives in bullet impact test[J].Chinese Journal of Energetic Materials,2008,16(4):432-435.

相似文献/References:

[1]田四朋,唐国金,雷勇军,等.固体火箭发动机随机药柱结构分析参数的灵敏度研究[J].固体火箭技术,2008,(1):28.
[2]封锋,陈军,郑亚.基于能量特性配方设计专家系统的开发与实现[J].固体火箭技术,2009,(02):206.
[3]张伟,樊学忠,张腊莹,等.NEPE推进剂低温瞬态的粘弹特性[J].固体火箭技术,2009,(03):298.
[4]阳建红,刘朝丰,邓凯.固体推进剂的变角剪切力学试验研究[J].固体火箭技术,2009,(04):436.
[5]闫大庆,徐丹丹,师经国.固体推进剂粘合剂HTPE研究及其分子设计思想概述[J].固体火箭技术,2009,(06):644.
[6]李苗苗,汪越,郭效德,等.RDX/AMMO-BAMO推进剂燃烧模型[J].固体火箭技术,2009,(06):654.
[7]陈煜,刘云飞,夏吉东,等.键合剂对NEPE推进剂破坏趋势影响的实验定量研究[J].固体火箭技术,2010,(03):299.
[8]刘中兵,汪亮,胡春波.HTPB推进剂高压燃烧特性研究[J].固体火箭技术,2010,(03):302.
[9]段毅,刘宇,覃粒子,等.考虑两相表面反应的二硝酰胺铵点火研究[J].固体火箭技术,2010,(03):311.
[10]刘晶如,罗运军.固体推进剂用铝基复合材料的制备及性能[J].固体火箭技术,2010,(05):545.

更新日期/Last Update: 2019-08-29
PDF下载 分享