[1]宋孟奇,侯晓,沙宝林.固体火箭发动机壳体固化过程温度场影响因素分析[J].固体火箭技术,2019,42(04):523-528.
 SONG Mengqi,HOU Xiao,SHA Baolin.Analysis of influencing factors on the temperature field during the curing processes of solid rocket motor cases[J].Journal of Solid Rocket Technology,2019,42(04):523-528.
点击复制

固体火箭发动机壳体固化过程温度场影响因素分析

参考文献/References:

[1]崔红,王晓洁,闫联生.固体火箭发动机复合材料与工艺[M].西安:西北工业大学出版社,2016.CUI Hong,WANG Xiaojie,YAN Liansheng. Solid rocket motor composites and technology [M]. Xi’an: Northwestern Polytechnical University Press,2016.[2]Johar M,Israr H A,Low K O,et al. Numerical simulation methodology for mode II delamination of quasi-sotropic quasi-omogeneous composite laminates[J]. Journal of Composite Materials,2017,51(28):3955-968.[3]Hubert P,Vaziri R,Poursartip A.A two-imensional flow model for the process simulation of complex shape composite laminates[J]. International Journal for Numerical Methods in Engineering,2015,44(1):1-6.[4]王新颖.复合材料壳体热缠绕过程数值模拟研究[D].哈尔滨:哈尔滨理工大学,2011.WANG Xinying. Numerical simulation research of In-itu modeling process for composite shell[D]. Harbin: Harbin University of Science and Technology,2011.[5]许家忠,李爽,乔明,等.树脂基复合材料内外协同固化工艺仿真与分析[J].玻璃钢/复合材料,2015(7):12-7.XU Jiazhong,LI Shuang,QIAO Ming,et al. Resin matrix composites simulation and analysis of internal-xternal coordination curing[J]. Fiber Reinforced Plastics/Composites,2015(7):12-17.[6]李婷婷,李艳霞,陈超,等.603环氧树脂体系固化动力学模型的建立与验证[J].复合材料学报,2018,35(1):95-102.LI Tingting,LI Yanxia,CHEN Chao,etc. Stablishment and verification of curing kinetics model of 603 epoxy resin system[J]. Journal of Composites,2018,35(1): 95-102. [7]李恒,王德海,钱夏庆.非等温DSC法研究环氧树脂体系固化动力学[J].固体火箭技术,2013,36(2):266-269+284.LI Heng,WANG Dehai,QIAN Xiaqing. Curing kinetics of epoxy resin by non-isothermal DSC method[J]. Journal of Solid Rocket Technology,2013,36(2): 266-269+284.[8]Sestak J,Berggren G. Study of the kinetics of the mechanism of solid-state reactions at increasing temperatures[J]. Thermochimica Acta,1971,3(1):1-12.[9]Kamal M R. Thermoset characterization for moldability analysis[J]. Polymer Engineering & Science,2010,14(3):231-239.[10]Montserrat S,Malek J. A kinetic analysis of the curing reaction of an epoxy resin[J]. Thermochimica Acta,1993,228:47-60.

相似文献/References:

[1]尤军峰,陈汝训,李书良.固体发动机壳体弹塑性问题的实验应力计算方法[J].固体火箭技术,2008,(4):386.
[2]陈汝训.纤维缠绕壳体的应力平衡系数和圆筒缠绕角[J].固体火箭技术,2009,(06):677.
[3]任萍,侯晓,何高让,等.药柱对燃烧室外压失稳载荷的影响[J].固体火箭技术,2010,(05):569.
[4]樊钰,叶定友,史宏斌.温度影响下固体火箭发动机复合材料壳体实验研究[J].固体火箭技术,2013,(04):539.
[5]陈汝训,陈怡.药柱内表面应变与壳体应变的关系[J].固体火箭技术,2013,(06):763.
[6]余文学,徐秉恒,刘洪超,等.固体火箭发动机锥形壳体外压稳定性分析[J].固体火箭技术,2014,(04):551.
[7]郭运强,王云霞,孙展鹏,等.壳体外防热设计计算及风洞试验研究[J].固体火箭技术,2018,41(01):18.
 GUO Yunqiang,WANG Yunxia,SUN Zhanpeng,et al.Wind tunnel test and design of external thermal insulation for shell[J].Journal of Solid Rocket Technology,2018,41(04):18.
[8]杨威,毛龙,王文平,等.基于ANSYS的气体发生器处于非稳态下的温度与应力[J].固体火箭技术,2019,42(02):164.
 YANG Wei,MAO Long,WANG Wenping,et al.Temperature and stress of gas generator under unsteady state based on ANSYS[J].Journal of Solid Rocket Technology,2019,42(04):164.

更新日期/Last Update: 2019-08-30
PDF下载 分享