[1]张哲,赵鹏,孙国栋,等.酚醛树脂溶液浓度对液相浸渍-化法制备C/C复合材料浸渍效率的影响[J].固体火箭技术,2019,42(06):771-778.
 ZHANG Zhe,ZHAO Peng,SUN Guodong,et al.Effect of concentration of phenolic resin on impregnation efficiency of carbon/carbon composites prepared by liquid-impregnation carbonization method[J].Journal of Solid Rocket Technology,2019,42(06):771-778.
点击复制

酚醛树脂溶液浓度对液相浸渍-化法制备C/C复合材料浸渍效率的影响

参考文献/References:

[1]Bevilacqua M,Babutskyi A,Chrysanthou A.A review of the catalytic oxidation of carbon-carbon composite aircraft brakes[J].Carbon,2015,95(1):861-869.[2]倪昕晔,李爱军,钟萍,等.不同高温处理工艺对C/C复合材料生物相容性的影响[J].材料工程,2014(6):62-67.NI Xinye,LI Aijun,ZHONG Ping,et al.Effect of different high temperature treatment processes on biocompatibility of Carbon/Carbon composites[J].Journal of Materials Engineering,2014(6):62-67.[3]Mohseni H,Scharf T W.Role of atomic layer deposited soild lubricants in the sliding wear reduction of carbon-carbon composites at room and higher temperatures[J].Wear,2015,332:1303-1313.[4]HAO M Y,LUO R Y,XIANG Q,et al.Effects of fiber-type on the microstructure and mechanical properties of carbon/carbon composites[J].New Carbon Materials,2014,29(16):444-453.[5]王建武,李克智,张守阳,等.ICVI工艺致密化C/C复合材料的数值模拟[J].固体火箭技术,2014,37(05):711-717.WANG Jianwu,LI Kezhi,ZHANG Shouyang,et al.Numerical simulation of densification of carbon/carbon composites by ICVI process[J].Journal of Solid Rocket Technology,2014,37(05):711-717.[6]刘志成,张守阳,李贺军,等.正丙醇ICVI制备C/C复合材料的组织结构及力学性能[J].无机材料学报,2011,26(2):191-196.LIU Zhicheng,ZHANG Shouyang,LI Hejun,et al.Microstructures and mechanical behavior of C/C composites prepared by ICVI using n-propanol as precursor[J].Journal of Inorganic Materials,2011,26(2):191-196.[7]FEI Y B,LU J H,LI H J,et al.Influence of heat treatment temperature on microstructure and thermal expansion properties of 2D carbon/carbon composites[J].Vacuum,2014,102(8):51-53.[8]魏强强,刘秀军,樊帧,等.中间相沥青族组成制备C/C复合材料及性能研究[J].材料导报,2014,28(11):63-66.WEI Qiangqiang,LIU Xiujun,FAN Zhen,et al.Preparation and properties of C/C composites from different group compositions of mesophase pitch[J].Materials Review,2014,28(11):63-66.[9]HUANG M C,TENG H.Urea impregnation to enhance porosity development of carbons prepared from phenolformaldehyde resins[J].Carbon,2002,40(6):955-958.[10]闫联生,姚冬梅,杨学军.硼酚醛烧蚀材料的研究[J].固体火箭技术,2000(02):69-73.YAN Liansheng,YAO Dongmei,YANG Xuejun.Study on boron-phenolic resin ablative materials[J].Journal of Solid Rocket Technology,2000,(02):69-73.[11]Kluc[DD(-*1]ˇ[DD)]áková M.Rheological properties of phenolic resin as a liquid matrix precursor for impregnation of carbon-carbon composites with respect to conditions of the densification process[J].Composites Science and Technology,2004,64(7-8):1041-1047.[12]余林,徐永东,张立同,等.树脂液相浸渍法制备3D针刺炭/炭预制体影响因素研究[J].玻璃钢/复合材料,2007(04):26-29.YU Lin,XU Yongdong,ZHANG Litong,et al.Study on influence factors of preparing 3D needled C/C preform by liquid-phase resin impregnation[J].Fiber Reinforced Plastics/Composites,2007 (04):26-29.[13]Kluc[DD(-*1]ˇ[DD)]áková M.Analysis of relationship between properties and behaviour of materials used and conditions of carbon-carbon composites[J].Acta Materialia,2005,53(14):3841-3848. [14]Cohen Y,Aizenshtat Z.Investigation of pyrolytically produced condensates of phenol-formaldehyde resins,in relation to their structure and decomposition mechanism[J].Journal of Analytical & Applied Pyrolysis,1992,22(3):153-178.[15]Puglia D,Kenny J M,Manfredi L B,et al.Influence of the chemical composition on the thermal degradation and fire resistance of resol type phenolic resins[J].Mater.Eng.,2001,12:55-72.[16]张亚妮,徐永东,高列义,等.基于酚醛树脂的炭/炭复合材料在高温分解过程的微结构演变[J].复合材料学报,2006(1):37-43.ZHANG Yani,XU Yongdong,GAO Lieyi,et al.Microstructural evolution of phenolic-based carbon/carbon composites during pyrolysis[J].Acta Materiae Compositae Sinica,2006(1):37-43.[17]Trick K A,Saliba T E,Sandhu S S.A kinetic model of the pyrolysis of phenolic resin in a carbon/phenolic composite[J].Carbon,1997,35(3):393-401.[18]Rajaei M,Beheshty M H,Hayaty M.Preparation and processing characterization of glass/phenolic prepregs[J].Polymers & Polymer Composites,2010,19(9):789-796.[19]Domínguez J C,Alonzo M V,Oliet M,et al.Chemorheological study of the curing kinetics of a phenolic resol resin gelled[J].European Polymer Journal,2010,46(1):50-57.[20]Knop B A,Scheib W.Chemistry and application of phenolic resins[M].Spring-Verlag,1979.[21]Meissner B.Physics of polymers (in Czech).Prague:SNTL,1984.[22]Theriault R P,Osswald T A,Castro J M.A numerical model of the viscosity of an epoxy prepreg resin system[J].Polymer Composites,1999,20(5):628-633.[23]Malkin A Y,Kulichikhin S G.Rheokinetics[M].Huthig & Wepf Verlag,1996.

相似文献/References:

[1]张衍,刘育建,王井岗,等.DSC对苯基苯酚改性酚醛树脂固化机理研究[J].固体火箭技术,2007,(2):142.
[2]尹昌平,肖加余,曾竟成,等.用于共注射RTM工艺的环氧树脂和酚醛树脂的工艺特性[J].固体火箭技术,2009,(05):574.
[3]刘乃亮,齐暑华,李春华,等.纳米粒子原位杂化酚醛/炭纤维烧蚀防热研究[J].固体火箭技术,2011,(04):501.

更新日期/Last Update: 2020-01-14
PDF下载 分享