[1]李权,罗志伟,冯晨,等.熔滴过渡模式及丝材对电弧增材制造Al-6.3Cu合金气孔含量的影响[J].固体火箭技术,2019,42(06):801-807.
 LI Quan,LUO Zhiwei,FENG Chen,et al.Influence of arc mode and wire properties on porosity of additively manufactured Al6.3Cu alloy[J].Journal of Solid Rocket Technology,2019,42(06):801-807.
点击复制

熔滴过渡模式及丝材对电弧增材制造Al-6.3Cu合金气孔含量的影响

参考文献/References:

[1]刘业胜,韩品连,胡寿丰,等.金属材料激光增材制造技术及在航空发动机上的应用[J].航空制造技术,2014,(10):62-67.LIU Yesheng,HAN Pinlian,HU Shoufeng,et al.Development of laser additive manufacturing with metallic materials and its application in aviation engines [J].Aeronautical Manufacturing Technology,2014,(10):62-67.[2]巩水利,锁红波,李怀学.金属增材制造技术在航空领域的发展与应用[J].航空制造技术,2013(13):66-71.GONG Shuili,SUO Hongbo,LI Huaixue,et al.Development and application of metal additive-manufacturing technology [J].Aeronautical Manufacturing Technology,2013,433(13):66-71.[3]田宗军,顾冬冬,沈理达,等.激光增材制造技术在航空航天领域的应用与发展[J].航空制造技术,2015(11):38-42.TIAN Zongjun,GU Dongdong,SHEN Lida,et al.Application and development of laser additive manufacturing technology in aeronautics and astronautics [J].Aeronautical Manufacturing Technology,2015,480(11):38-42.[4]李权,王福德,王国庆,等.航空航天轻质金属材料电弧熔丝增材制造技术[J].航空制造技术,2018,61(3):74-82.LI Quan,WANG Fude,WANG Guoqing,et al.Wire and arc additive manufacturing of lightweight metal components in aeronautics and astronautics [J].Aeronautical Manufacturing Technology,2018,61(3):7482.[ZK)][5]Williams S W,Martina F,Addison A C,et al.Wire + arc additive manufacturing[J].Materials Science and Technology,2016,32(7):641-647.[6]姚君山,蔡益飞,李程刚.运载火箭箭体结构制造技术发展与应用.航空制造技术,2007(10):36-40.YAO Junshan,CAI Yifei,LI Cheng gang,et al.Development and application of the manufacturing technology of rocket structure [J].Aeronautical Manufacturing Technology,2007(10):36-40.[7]Gu J L,Ding J L,Williams S W,et al.The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3 Cu alloy [J].Materials Science and Engineering:A.2016,651:18-26.[8]Gu J L,Ding J,Williams S W,et al.The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys[J].Journal of Materials Processing Technology,2016,230:26-34. [9]Bai J Y,Fan C L,Lin S B,et al.Mechanical properties and fracture behaviors of GTA-additive manufactured 2219Al after an especial heat treatment [J].Journal of Materials Engineering and Performance.2017,26(4):1808-1816.[10]Cong B Q,Ding J L,Williams S W,et al.Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy[J].The International Journal of Advanced Manufacturing Technology,2015.76(9-12):1593-1606.[11]从保强,丁佳洛.CMT工艺对Al-Cu合金电弧增材制造气孔的影响[J].稀有金属材料与工程,2014,43(12):3149-3153.CONG Baoqiang,DING Jialuo.Influence of CMT process on porosity of wire arc additive manufactured Al-Cu alloy[J].Rare Metal Materials and Engineering,2014,43(12):3149-3153.

更新日期/Last Update: 2020-01-14
PDF下载 分享