[1]路浩,韩佩,梁志敏,等.自然时效对Al-Zn-Mg合金搅拌摩擦焊接头显微硬度与残余应力影响[J].固体火箭技术,2019,42(06):808-813.
 LU Hao,HAN Pei,LIANG Zhimin,et al.Microhardness and residual stress evolution of Al-Zn-Mg alloy friction stir welded joint with aging[J].Journal of Solid Rocket Technology,2019,42(06):808-813.
点击复制

自然时效对Al-Zn-Mg合金搅拌摩擦焊接头显微硬度与残余应力影响

参考文献/References:

[1]张欣盟,杨景宏,王春生,等.搅拌摩擦焊技术及其应用发展[J].焊接,2015(1):29-32.ZHANG Xinmeng, YANG Jinghong, WANG Chunsheng, et al. Applications and developments of friction stir welding[J].Welding and Joining,2015(1):29-32.[2]张铁浩,韩德成,陶传琦,等. 轨道车辆铝合金车体搅拌摩擦焊的工业化应用[J].焊接,2013(10):25-30.ZHANG Tiehao, HAN Decheng, TAO Chuanqi, et al. Industrial application of friction stir welding for aluminum alloy of railway vehicle[J]. Welding and Joining,2013(10):25-30.[3]张华,林三宝,吴林,等.搅拌摩擦焊研究进展及前景展望[J].焊接学报,2003,24(3):91-96.ZHANG Hua, LIN Sanbao, WU Lin, et al. Research progress and prospect of friction stir welding[J].Transactions of The China Welding Institution, 2003, 24(3):91-96.[4]Johnson M R. Friction stir welding takes off at boeing[J].Welding Journal.1999,78(2):35-39.[5]Immarigeon J P, Holt R T, Koul A K, et al. Light weight materials for aircraft applications[J]. Materials Characterization, 1995,35(1):41-67.[6]刘志华, 赵兵, 赵青. 21世纪航天工业铝合金焊接工艺技术展望[J].导弹与航天运载技术, 2002(5): 63-65.LIU Zhihua, ZHAO Bing, ZHAO Qing. Prospect of aluminum alloy welding technology in aerospace industry in the 21st century[J]. Missile and Space Launch Technology, 2002(5):63-65.[7]铝合金中厚板搅拌摩擦焊技术要求:QJ 20043—2011[S].中国航天标准化研究所,2011.[8]铝合金搅拌摩擦焊工艺规范:QJ 20044—2011[S].国家国防科技工业局,2011.[9]铝合金搅拌摩擦焊接超声波相控阵检查方法:QJ 20045—2011[S].中国航天标准化研究所,2011. [10]铝合金摩擦塞补焊技术要求:QJ 20046—2011[S].国家国防科技工业局,2011.[11]铝合金摩擦塞补焊工艺规范:QJ 20047—2011[S].国家国防科技工业局,2011.[12]LU Hao, LIU Xuesong, YANG Jianguo, et al. Ultrasonic stress evaluation on welded plates with Lcr wave[J]. Science & Technology of Welding and Joining, 2008,13(1):70-75.[13]路浩,李军. 箱型搅拌摩擦焊结构残余应力超声波法测量[J].焊接. 2014(3):27-30.LU Hao,LI Jun. Residual stress measurement of friction stir welded box structure by ultrasound method[J]. Welding and Joining, 2014(3): 27-30.[14]路浩.铝合金静止轴肩搅拌摩擦焊残余应力超声波法测量[J].焊接,2015(1):25-28.LU Hao. Residual stress measurement of aluminum alloy friction stir welding of static shaft shoulder by ultrasound method[J]. Welding and Joining, 2015(1): 25-28.

相似文献/References:

[1]杜宇,李志猛,杨涛,等.预浸带铺放成型复合材料构件应力场研究[J].固体火箭技术,2015,(05):712.
[2]梁群,冯喜平.复合材料壳体固化成型过程残余应力和形变分析[J].固体火箭技术,2019,42(05):628.
 LIANG Qun,FENG Xiping.Residual stress and structural distortion analysis for the curing process of SRM composite case[J].Journal of Solid Rocket Technology,2019,42(06):628.

更新日期/Last Update: 2020-01-14
PDF下载 分享